Toshiba B-EX4T1 manual Cont, User System Mode, Printer Setting, Function, 9LOG ⇒ Section

2. PRINTER SETUP

ENGLISH VERSION EO1-33089

2.6 Printer Setting

2.6 Printer Setting			„ Key functions in the system mode
(Cont.)
				Key	Function
				[MODE]	Returns to the mode menu screen.
				[CANCEL] or	Returns to the upper hierarchy.
				[FEED]+[RESTAR]
				[ENTER] or [PAUSE]	Displays a next screen.
					Saves the setting and returns to the upper
		PAUSE			hierarchy.
FEED				[UP] or [RESTART]	Moves the cursor upward. (Note 1)
		RESTART			Increases a value. (Note 2)
MODE				[DOWN] or [FEED]	Moves the cursor downward. (Note 1)
		UP
					Decreases a value. (Note 3)
LEFT		RIGHT
				[LEFT]	Moves the cursor to the left. (Note 3)
CANCEL		ENTER		[RIGHT]	Moves the cursor to the right. (Note 3)
	DOWN
					NOTES:

1.The cursor does not move any further when the selected option is listed at the top or bottom.

2.The value does not increase or decrease any further when the selected value is the upper or lower limit.

3.The cursor does not move any further when it is at the left-most or right-most position.

4.Be careful the selected value does not become effective if the printer is turned off without pressing the [ENTER] key.

2.6.1 User System Mode	How to enter the User System Mode
	ONLINE	[PAUSE]		Hold down [RESTART]
			Hold down [MODE]

User System Mode

The User System Mode consists of the following menus.

<1>RESET

Used to reset the printer.

<2>PARAMETER SET (⇒ Section 2.6.2) Used to set the printer parameters.

<3>ADJUST SET (⇒ Section 2.9)

Used to fine adjust the print start position, cut position, etc.

<4>LAN/WLAN (⇒ Section 2.6.3)

Used to enable or disable the LAN communication and SNMP.

<5>BASIC (⇒ Section 2.6.4)

Used to set the function of basic program when it is loaded to the printer.

<6>Z-MODE (⇒ Section 2.6.5) Same as BASIC

<7>AUTO CALIB (⇒ Section 2.6.6)

Used to enable or disable the automatic calibration function.

<8>DUMP MODE (⇒ Section 2.6.6)

Used to print the data in the receive buffer for debug.

<9>LOG (⇒ Section 2.6.7)

Used to save print logs in a USB memory.

E2-15