Toshiba B-EX4T1 manual Printer Setting, Power OFF, ONLINE Mode, PAUSE state, User System Mode

2. PRINTER SETUP

ENGLISH VERSION EO1-33089

2.6 Printer Setting

2.6 Printer Setting

Depending on the settings of your host computer or an interface to be used, it may be necessary to change the printer parameter settings.

Follow the procedures described below to change the printer parameter settings to correspond to your environment.

NOTE:

Incorrect settings can cause the printer to function erroneously. If you have any problems with the parameter settings, please contact your nearest TOSHIBA TEC service representative.

For the settings this manual does not cover, please contact your nearest TOSHIBA TEC service representative, or refer to the B-EX4T Series Key Operation Specification.

	Power ON
Power OFF		ONLINE Mode
			[PAUSE]
		PAUSE state

Hold down [RESTART]

User System Mode

Hold down [MODE]

Turn on the power while holding down [FEED] & [PAUSE] or [MODE].

•Reset

•Parameter setting (⇒Section 2.6.2)

•Fine adjustment (⇒Section 2.9)

•LAN/WLAN (⇒Section 2.6.3)

•BASIC (⇒Section 2.6.4)

•Z-MODE(⇒Section 2.6.5)

•Auto calibration (⇒Section 2.6.6)

•Dump mode (⇒Section 2.6.7)

•Log (⇒Section 2.6.8)

System Mode

•Self diagnosis

•Parameter setting

•Fine adjustment

•Test print (⇒Section 2.8)

•Sensor adjustment

•RAM clear

•Interface setting (⇒Section 2.6.10)

•BASIC mode

•RFID setting

•Real Time Clock (⇒Section 2.6.11)

•Z-MODE

•USB memory

•Reset

E2-14