Toshiba B-EX4T1 manual Loading the Media Cont

2. PRINTER SETUP

ENGLISH VERSION EO1-33089

2.3 Loading Supplies

2.3.1Loading the Media (Cont.)

NOTE:

Do not over-tighten the Locking Ring of the Supply Holder.

7.Align the projection of the Supply Holder with the groove of the Supply Shaft, and push the Supply Holder against the media until the media is held firmly in place. This will centre the media automatically.

Then turn the Locking Ring clockwise to secure the Supply Holder.

Supply Holder Guide Shaft Projection

	Locking Ring	Groove
Supply Shaft

In the case of a label rolled with the print side facing inside.

In the case of a label rolled with the print side facing outside.

Media Guide Shaft

8.Place the media between the Media Guides, adjust the Media Guides to the media width, and tighten the Locking Screw.

9.Check that the media path through the printer is straight. The media should be centred under the Print Head.

Media Guide Print Head Supply Holder

Locking Screw Media Media Guide

E2- 6