Toshiba B-EX4T1 manual Loading the Media Cont, Loading with cutter

2. PRINTER SETUP

ENGLISH VERSION EO1-33089

2.3 Loading Supplies

2.3.1Loading the Media (Cont.)

WARNING!

The cutter is sharp, so care must be taken not to injure yourself when handling the cutter.

CAUTION!

1.Be sure to cut the backing paper of the label. Cutting labels will cause the glue to stick to the cutter which may affect the cutter quality and shorten the cutter life.

2.Use of tag paper when the thickness exceeds the specified value may affect the cutter life.

14.Loading with cutter

When the optional Cutter Module is fitted, the media is automatically cut. A disc cutter and a rotary cutter are available as an option, but they are used in the same way.

Insert the leading edge of the media into the cutter until it comes out the Media Outlet of the Cutter Module.

Cutter Module

Media

Media Outlet

NOTE:

When using the Rotary Cutter, be sure to install the Ribbon Saving Module (B-EX904-R-QM-R).

Failure to do this may cause a paper jam or ribbon error.

E2- 9