Toshiba B-EX4T1 manual Loading the Media

2. PRINTER SETUP

ENGLISH VERSION EO1-33089

2.3 Loading Supplies

2.3.1 Loading the Media

NOTES:

1. When the Head Lever is

turned to FREE position, the

The following procedure shows the steps to properly load the media into the printer so that it feeds straight and true through the printer.

The printer prints both labels and tags.

1.Turn off the power and open the Top Cover.

2.Turn the Head Lever to FREE position, then release the Ribbon Shaft Holder Plate.

3.Open the Print Head Block.

Print Head is raised.

2. To enable printing the Head

Lever must be set to the

LABEL / TAG position.

(This ensures that the Print

Head is closed.)

There are two head pressure

levels in the LABEL / TAG

position. Set the Head Lever

Print Head Block

FREE

LABEL

TAG

Top Cover

depending on the media type:

Position LABEL: Labels

Position TAG : Tags

However, proper position

may differ depending on

media. For details, refer to

your TOSHIBA TEC

authorised service

representative.

3. Do not turn the Locking Ring

counter-clockwise too far or it

may come off the Supply

Holder.

Head

Lever

Ribbon Shaft Holder Plate

4.Turn the Locking Ring counterclockwise and remove the Supply Holder from the Supply Shaft.

Locking Ring

Supply Shaft

Supply Holder

5.Put the media on the Supply Shaft.

6.Pass the media around the Guide Shaft, then pull the media towards the front of the printer.

E2- 5