Toshiba B-EX4T1 manual

APPENDIX 1 MESSAGES AND LEDS

ENGLISH VERSION EO1-33089

APPENDIX 1 MESSAGES AND LEDS

		LED Indication		Printer Status	Restoration by	Acceptance of
No.	LCD Message				RESTART key	Status Request/
						Reset Command
		ONLINE	ERROR		Yes/No	Yes/No
21	POWER FAILURE	z		A power failure has occurred.	No	No
22	EEPROM ERROR	z		Data cannot be read from/written to a	No	No
				backup EEPROM properly
				When the following abnormal	No	No
				operations are performed, a system
				error occurs:
				(a) Command fetch from an odd
				address
				(b) Access to word data at an odd
				address
				(c) Access to long-word data at an
				odd address
23	SYSTEM ERROR	z		(d) Access to the area of 80000000H
				to FFFFFFFFH in the logic space
				in user mode.
				(e) An undefined instruction in an
				area other than a delay slot was
				decoded.
				(f) An undefined instruction in a
				delay slot was decoded.
				(g) An instruction to rewrite a delay
				slot was decoded.
24	DHCP CLIENT	z	z	DHCP Client is being initialised. (Only	-----	-----
	INITIALIZING…			when the DHCP is enabled.)
				The printer did not succeed in writing	Yes	Yes
25	RFID WRITE ERROR	z		data onto an RFID tag after having
				retried for a specified times.
26	RFID ERROR	z		The printer cannot communicate with	Yes	Yes
				the RFID module
27	LOW BATTERY	z		The voltage of the Real Time Clock	No	Yes
				Battery is low level.
28	INPUT PASSWORD	z	z	The printer is waiting for a password to	No	No
				be entered.
29	PASSWORD INVALID	z	z	A wrong password was entered	No	No
	Please Power OFF			consecutively for three times.

NOTE: When an error message listed above appears on the LCD message display, please refer to Section 5 TROUBLESHOOTING for solution.

EA1- 2