Toshiba B-EX4T1 manual Dump Mode Setting, Buffer, Dump List

• ALL

2. PRINTER SETUP

ENGLISH VERSION EO1-33089

2.6 Printer Setting

2.6.7 Dump Mode Setting

USER SYSTEM MODE

<5>BASIC

<6>Z-MODE

<7>AUTO CALIB

<8>DUMP MODE

NOTE:

If a file with the same name already exists in the USB memory, it will be overwritten.

In the Dump Mode, data in the receive buffer are printed. Data are expressed in hexadecimal values. This operation allows verification of the programming commands or debug of the program.

(1) BUFFER

This parameter is to choose the receive buffer to dump.

•	RS-232C	RS-232C receive buffer
•	CENTRONICS	Centronics receive buffer
•	LAN	Network I/F receive buffer
•	BASIC1	BASIC Interpreter:
		I/F → Interpreter buffer
•	BASIC2	BASIC Interpreter:
		Interpreter buffer → I/F
•	USB	USB receive buffer
•	RFID	RFID receive buffer

(2) DUMP LIST

This parameter is to choose the output destination.

• USB MEMORY	Saves in the USB memory. → c
• PRINT	Prints out → d

cWhen USB MEMORY is selected:

A file is automatically created in the USB memory and named in the following format based on the printer model and saved date.

/ATA0/DUMP/B-EX4T1_DUMP_1007291030.BIN (e.g. B-EX4T Type1, 10:30, July 29, 2010)

dWhen PRINT is selected:

Choose a printing method.

• ON DEMAND Prints 166 lines of data (approx. 50 cm), then stops. Subsequent data is printed when the [ENTER] key is pressed.

Prints all data in the receive buffer.

E2-27