Toshiba B-EX4T1 manual Product Overview, Introduction, Features, Unpacking

1. PRODUCT OVERVIEW

ENGLISH VERSION EO1-33089

1.1 Introduction

1. PRODUCT OVERVIEW

1.1 Introduction

Thank you for choosing the TOSHIBA B-EX4T1 series bar code printer. This Owner’s Manual contains from general set-up through how to confirm the printer operation using a test print, and should be read carefully to help gain maximum performance and life from your printer. For most queries please refer to this manual and keep it safe for future reference. Please contact your TOSHIBA TEC representative for further information concerning this manual.

1.2 Features

This printer has the following features:

•The print head block can be opened providing smooth loading of media and ribbon.

•Various kinds of media can be used as the media sensors can be moved from the centre to the left edge of the media.

•Web functions such as remote maintenance and other advanced network features are available.

•Superior hardware, including the specially developed 8 dots/mm (203 dots/inch) or 12 dots/mm (305 dots/inch) thermal print head which will allow very clear print at a printing speed of 3 inches/sec., 6 inches/sec., 10 inches/sec., 12 inches/sec. or 14 inches/sec. with 8 dots/mm thermal head or 3 inches/sec., 5 inches/sec., 8 inches/sec., 10 inches/sec., 12 inches/sec. or 14 inches/sec. with 12 dots/mm thermal head.

•Besides the optional Cutter Module, there is also an optional Peel off Module, Ribbon Saving Module, RS-232C I/F card, Centronics I/F card, Expansion I/O Card, Wireless LAN I/F card, the RTC/USB host I/F card, RFID module, and Narrow width platen kit.

1.3 Unpacking

NOTES:

1.Check for damage or scratches on the printer. However, please note that TOSHIBA TEC shall have no liability for any damage of any kind sustained during transportation of the product.

2.Keep the cartons and pads for future transportation of the printer.

Unpack the printer as per the Unpacking Instructions supplied with the printer.

E1- 1