Toshiba B-EX4T1 manual Cont, Parameter Setting, Printer Set

2. PRINTER SETUP

ENGLISH VERSION EO1-33089

2.6 Printer Setting

2.6.2 Parameter Setting	2.6.2.1 Printer Set
(Cont.)	(1) MEDIA LOAD
	This parameter is to choose how the printer behaves to detect the
	home position.
	•	OFF	Media loading function is disabled (Same as a feed
			by [FEED] key)
	•	STD	When the printer is tuned on, reset in batch, or print
			head is closed, the printer detects a gap/black mark
			and feeds the paper from the sensor to the print start
			position.
	•	ECO	When the printer is tuned on, reset in batch, or print
			head is closed, the printer detects a gap/black mark
			and feeds the paper to the print start position based
			on the label pitch.
	•	ECO+Bfeed	Economy + backfeed

(2) FORWARD WAIT

This parameter is to choose whether or not to activate the auto forward wait function. This function, used in the cut mode, automatically feeds the media forward if there is more than 1-second idle time after printing, to prevent the top edge of the media from curling.

•	OFF	Disables the auto forward feed wait
•	ON	Enables the auto forward feed wait

(3) FORWARD WAIT POS.

When the auto forward feed wait parameter is set to ON, the feed amount can be fine adjusted.

		+5.0mm
		+4.9mm
		-4.9mm
		-5.0mm
(4) FW/BK ACT.
•	MODE1	The printer waits for next issue with 13.7-mm media
		forwarded.
•	MODE2	When the thermal transfer method, Transmissive
		sensor, and cut issue are selected, the printer feeds 6-

mm media backward, then waits for next issue with 3-mm media forwarded.

.

E2-17