NAD T 763 DTS ES Expanded Surround DTS ES, DTS-ES Discrete, DTS ES Matrix, DTS NEO 6 Surround

Page 21

USING THE T 753

ABOUT DTS AND DOLBY DIGITAL SURROUND MODES

DTS DIGITAL SURROUND

The Digital Theater System Digital Surround (simply called DTS) is a multichannel digital signal format that can process higher data rates than with Dolby Digital. Although both Dolby Digital and DTS are 5.1 channel media formats, discs bearing the “DTS” symbol are thought to provide better sound quality due to the lower audio compression required.

It also offers a broader dynamic, producing magnificent sound quality.

DTS - ES EXPANDED SURROUND ™ (DTS ES)

This is a new multichannel digital format which greatly improves the 360° spatial sensation of the Surround impression thanks to the greater space expansion of the surround signals, providing high compatibility with the conventional DTS format.

In addition to the 5.1 channels, the expanded DTS-ES Surround also offers the back surround (also sometimes called the “surround centre”) in reproduction, providing a total of 6.1 channels. The expanded DTS-ES Surround includes two formats, with two different methods of surround signal recording, as follows:

DTS-ES™ DISCRETE 6.1

Since the signals of the 6.1 Surround channels (including the back channel) are completely independent, it is possible to achieve the sensation that the acoustic image is moving about freely among the background sounds, 360 degrees surrounding the listener.

Although maximum quality is achieved with sound tracks recorded using this system and reproduced using the DTS-ES decoder, when played with a conventional DTS decoder, the back surround channel is automati- cally downmixed in the surround right and surround left channels of the surround system, in such a way that none of the signal components are lost.

DTS - ES™ MATRIX 6.1

In this format, the additional signals of the back channel receive a matrix encoding and are inputted into the right and left surround channels. During reproduction they are decoded to the right, left and back surround channels.

Since this bit-stream format is 100% compatible with conventional DTS signals, the DTS-ES Matrix 6.1 format effect can also be achieved from sources with DTS-ES 5.1 signals.

Naturally, it is also possible to reproduce from a DTS 5.1 channel decoder, signals recorded in DTS-ES 6.1. When a DTS-ES decoder processes decodes a discrete DTS-ES 6.1 or in Matrix 6.1, these formats are automatically detected and the Optimum Surround mode is selected.

However, some DTS-ES Matrix 6.1 sources may be detected as DTS. In this case the DTS-ES Matrix mode should be selected manually in order to reproduce them.

DTS NEO: 6™ SURROUND

This mode applies the conventional 2-channel signals such as digital PCM or analog stereo signals to the high precision digital matrix decoder used for DTS-ES Matrix 6.1, to achieve 6.1-channel surround playback. DTS Neo: 6 surround includes two modes for selecting the optimum decoding of the signal sources:

DTS NEO: 6 CINEMA

This method is ideal for the reproduction of movies. The decoding takes place by emphasising the separation in order to achieve the same atmosphere with 2-channel, as with 6.1-channel sources.

DTS NEO: 6 MUSIC

Mainly recommended for music reproduction. The right and left front channels do not pass through the decoder and are reproduced directly so there is no loss in sound quality, and the effects of the right surround, left surround, central and back surround channels add a natural sensation of expansion of the sound field.

“DTS”, “DTS-ES Extended Surround” and “Neo: 6” are registered trademarks of Digital Theater Systems, Inc.

DOLBY DIGITAL

Dolby Digital is the multi-channel digital signal format developed in the Dolby laboratories. Discs bearing the “DOLBY/Digital” symbol were recorded with up to 5.1 channels of digital signals, reproducing a much better sound quality, with dynamic and spatial sound sensations that are much better than in the previous Dolby Surround.

DOLBY DIGITAL EX

Using a Matrix decoder this method creates the back channel (sometimes also called the “surround center”) by means of signals on the left and right surround channels recorded in Dolby Digital 5.1, reproduction being provided in Surround 6.1. This method should be selected with sources bearing the “DOLBY/Digital -EX” symbol, recorded in Dolby Digital Surround EX. With this additional channel you will experience improved dynamics and a better sensation of movement within the sound field.

If media sources recorded in Dolby Digital EX are decoded with a Digital EX decoder, the format is detected automatically, and the Dolby Digital EX mode is selected.

However, some media sources recorded in Dolby Digital EX can be detected as simple Dolby Digital media sources. In this case Dolby Digital EX should be selected manually.

ENGLISH

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents English Explanation of Graphical Symbols Safety InformationPrecautions InstallationMaintenance Electric PowerDamage Requiring Service Do not Attempt to Service the Unit Yourself OWNER’S RecordTable of Contents Using the HTR 2 Remote Control Troubleshooting SpecificationsGetting the Most from the NAD T Connecting AM Antenna Unpacking and SetupWHAT’S in the BOX Choosing a LocationR.S., Matrix and Digital Surround About the TEase of USE IntegrationUpgradability About the HTR 2 System Remote ControlPlay a DVD Movie QuickstartSearch Front PanelDigital Input Jack +12V Trigger IN/OUT Rear PanelRear Panel Setting UP the T Getting StartedDealing with HUM and Noise Input Settings Input SetupAbout the ON-SCREEN Displays OSD and FRONT-PANEL Readout Display the OSDSpeaker Setup Speaker SettingsListening Mode Using AN SPL Meter CHANNEL-BALANCE Test SetupSetting Channel Balance Setting Speaker DistanceRecalling Presets Creating PresetsUsing the T Setting Radio Presets Tuning StationsSelecting Radio Presets Choosing the FM Mute / ModeDTS-ES Discrete DTS ES Expanded Surround DTS ESDTS ES Matrix DTS NEO 6 SurroundDolby PRO Logic II Surround Dolby PRO LogicDolby PRO Logic II Movie Dolby PRO Logic II MusicDisplaying the Signal Mode Selecting Listening ModesDTS DTS Neo Adjusting Listening ModesAdjusting Channel Levels on the FLY Surround Sound Channel ChartTo Adjust Channel Levels Adjusting the Tone ControlsSpecifications Using the HTR 2 Remote ControlControlling the T Learning Codes from Other RemotesMacro Commands Copy a Command from Another KEYPUNCH-THROUGH Recording MacrosFactory Reset KEY-ILLUMINATION TimeoutDelete Mode Loading CODE-LIBRARIESTrigger Setup Using the ZR 2 Remote ControlSummary of HTR 2 Modes Assigning the Trigger OutputCondition Possible Causes Possible Solutionss TroubleshootingPhysical Specifications SpecificationsAV Surround Sound Receiver Amplifier SectionNAD

T 763 specifications

The NAD T 763 is a high-performance audio-video receiver that has garnered attention for its exceptional sound quality and versatile features. Designed for home theater enthusiasts, the T 763 combines advanced technologies to deliver an immersive audio experience, making it a recommended choice for both movie lovers and music aficionados.

One of the standout features of the NAD T 763 is its power output. It delivers 70 watts per channel into 8 ohms, ensuring that it can drive a variety of speakers with ease. This model integrates NAD's proprietary PowerDrive technology, which optimizes power delivery and ensures dynamic sound reproduction, even in demanding passages. This makes it suitable for a range of audio setups, from small living rooms to large home theaters.

The T 763 supports multiple audio formats, including Dolby Digital and DTS decoding. This capability allows users to enjoy high-fidelity soundtracks from DVDs and Blu-ray discs, creating an enveloping sound experience. Moreover, its compatibility with Pro Logic II means that it can effectively decode stereo signals into multi-channel formats, enhancing the listening experience for older media.

In terms of connectivity, the NAD T 763 does not disappoint. It features multiple inputs, including several HDMI ports, optical and coaxial digital inputs, and legacy connections like RCA for older equipment. This extensive range of connections allows users to integrate various sources, such as game consoles, streaming devices, and CD players with ease.

The T 763 also includes a user-friendly interface that simplifies operation. The intuitive on-screen menus make it easy to navigate through settings and customize audio performance. Additionally, the receiver comes with a remote control, providing convenience at your fingertips.

Another notable characteristic is the NAD's commitment to build quality. The T 763 is constructed with robust materials that enhance durability, ensuring that it can withstand years of use. The sleek design fits seamlessly into any audio-visual setup, appealing to aesthetic sensibilities alongside its performance capabilities.

In summary, the NAD T 763 is a versatile and powerful audio-video receiver that excels in sound quality and connectivity. With its innovative technologies and solid build, it stands out as a compelling option in the competitive landscape of home theater equipment. Whether for movie nights or music playback, the T 763 promises to elevate the home entertainment experience.
Top Page Image Contents