Sharp XG-F210X, XG-F260X Switching the Input Mode, Adjusting the Volume, On-screen display

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press COMPUTER, DVI, S-VIDEO or VIDEO on the remote control to select the input mode.

•When you press INPUT on the projector or DVI

on the remote control, the INPUT list appears. Press P/R to switch the INPUT mode.

COMPUTER, DVI,

S-VIDEO, VIDEO

buttons

AV MUTE button

VOL +/– (Volume) buttons

Adjusting the Volume

Press VOL +/– on the remote control or

–O/Q+on the projector to adjust the vol- ume.

Note

• Pressing VOL–/–Owill lower the volume.
• Pressing VOL+/Q+ will raise the volume.	On-screen display

•When the projector is connected to external equipment, the volume level of the external equip- ment changes in accordance with the volume level of the projector. Set the projector’s volume to the lowest level when turning the projector on/ off or when changing the input signal.

•When you do not want to output the sound from the projector’s speaker while the projector is con- nected to external equipment, set “Speaker” in “PRJ-ADJ” menu to “Off”. (See page 43.)

Displaying the Black Screen and Turning off the Sound Temporarily

Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound.

On-screen display

Note

•Pressing AV MUTE again will turn the pro- jected image back on.

OperationBasic

29