Sound Storm Laboratories SSV10.4FL Installation precautions, Operating precautions, Features

Page 3

Installation precautions

Choose a mounting location in your vehicle where the unit will not distract or otherwise interfere with the driver’s ability to control the vehicle.

Do not install components in areas which are susceptible to rain, moisture, direct sunlight, extreme heat or cold, excessive dust, dirt or humidity.

If installation requires drilling holes or other modifications to the vehicle, consult with your nearest dealer or professional car audio installer.

Use only the installation parts and hardware provided with the unit to ensure proper installation. Using other parts can cause malfunction and possible damage to your Sound Storm video monitor.

Use only a power source with 12 Volts DC (negative ground).

Before final installation, temporarily connect the wiring according to the diagram near the end of this manual, check it to ensure that it has been connected properly, and test the unit to make sure it is working correctly.

After the monitor is installed, do not arbitrarily pull it down or strike it. This may loosen the mounting screws and cause it to fall down.

Operating precautions

Turn the unit off when it is not in use.

Avoid dropping any metal objects or inflammable items into the monitor ventilation slots.

Do not place objects on or suspend objects from the power cord, as this may damage the cord.

Features

Your new video monitor features the following:

TFT Active Matrix LCD display

Overhead console mounting bracket

On-screen menu system

Audio/video input controls

Dual built-in dome lights

Wireless remote control

What is included?

When first unpacking your new flip- down monitor, please check first that the package contains all of the items below. If something is missing, contact the store where you purchased the player.

LCD monitor housing

Wireless remote control with battery

Video/power interface cable with inline fuse

Metal mounting plate

Black machine screws

(for attaching monitor to mounting plate)

SSV10.4FL User’s Manual User’s Manual - page 3

Image 3
Contents E R ’ S M a N U a L SSV10.4FLSafety precautions General precautionsWhat is included? Installation precautionsOperating precautions FeaturesRemote IR Sensor UP/DOWN Buttons Monitor Controls and FeaturesPower ON/OFF Power LEDSleep Remote ControlChanging the battery in the remote control Power12V Battery System wiringInstallation TIP Monitor installationReleasing and lowering the monitor Turning on the dome lights Powering up the monitorSub-menus in the OSD system On-screen OSD menu systemRemedy TroubleshootingSymptom CauseSpecifications SystemGeneral

SSV10.4FL specifications

The Sound Storm Laboratories SSV10.4FL is a standout in the world of car audio systems, designed specifically for those who crave high-quality sound and enhanced listening experiences on the road. This subwoofer is engineered to provide powerful bass and clarity, making it a popular choice among car audio enthusiasts.

One of the main features of the SSV10.4FL is its robust 10-inch polypropylene cone. This cone design not only ensures durability but also enhances the sound quality by effectively producing low-frequency sounds without distortion. This means that whether you're listening to hip-hop, rock, or electronic music, you can expect a deep, rich bass that elevates your audio experience.

Another key characteristic of the SSV10.4FL is its maximum power handling capability of 1200 watts. This high wattage capacity allows the subwoofer to produce mind-blowing sound levels without sacrificing audio clarity. The efficient voice coil and high-temperature rating further ensure that the subwoofer can handle rigorous use without overheating, making it a reliable choice for extended listening sessions.

The SSV10.4FL incorporates advanced technology such as a non-fatiguing rubber suspension system, which keeps the cone centered and reinforces the subwoofer's resilience. This feature is crucial for maintaining sound quality even at high volumes. Additionally, the heavy-duty, injection-molded basket provides a solid foundation for the subwoofer, enhancing its ability to perform at peak levels.

Installation is simplified with the user-friendly design of the SSV10.4FL. It features dual four-ohm voice coils, allowing for flexible wiring options that can easily integrate into various audio systems. This versatility makes it an attractive choice for both novice and experienced installers.

Moreover, the subwoofer is designed to be aesthetically pleasing, with a sleek finish that complements any car interior. The compact size ensures it can fit into most vehicles, allowing users to enjoy high-quality sound without sacrificing space.

In conclusion, the Sound Storm Laboratories SSV10.4FL subwoofer embodies a perfect blend of power, performance, and aesthetics. With its durable construction, impressive power handling, advanced technologies, and flexible installation options, it stands out as a dynamic addition to any car audio system. For those seeking a transformative audio experience, the SSV10.4FL is a top choice that promises to deliver booming bass and clear sound on every drive.