TANDBERG D13939 setup guide Connecting cables, LAN cable, Power cable

Page 12

TANDBERG Management Server Quick Setup Guide

2.2 Connecting cables

LAN cable

Connect a LAN cable from the ‘LAN 1’ connector on the Management Server to your network. The LAN 2, 3 and 4’ connectors are not used and should be left open.

Power cable

Connect the system power cable to an electrical distribution socket. Press the power switch button at the back side to ‘1’ to turn on the Management Server. On the front panel of the system the power indicator LED, marked ‘Pwr’, will light up.

12

Image 12

Contents Quick Setup Guide Trademarks and Copyright DisclaimerEnvironmental Issues Waste handlingProduction of products Operator Safety Summary Equipment MarkingsPage Contact us End-User License Information Table of Contents Introduction Installation PrecautionsInstallation site preparations UnpackingRack Mounting optional Connecting cables Power cableLAN cable IP Address Setting Configuration Up and Down arrowsEnter ReturnPage Product Registration and Updates Security UpdatesGeneral Use Restart and shutdownTandberg Management Server If the system does not respondHow to shutdown the Management Server Client Software RequirementsPage Administrator Settings Operating System SettingsTandberg Management Suite Settings Page Added systems