TANDBERG D13939 setup guide General Use, Restart and shutdown, Tandberg Management Server

TANDBERG Management Server Quick Setup Guide

4 General Use

TANDBERG Management Server

The Management Server should always be turned on.

The unit itself should not be available to users at any time.

If the system does not respond:

ƒCheck the LCD panel to determine if the unit is switched on and ‘live’.

ƒMake sure that the Management Server is switched on by using the On/Off switch located at the rear of the unit.

ƒRestart the Management Server using the LCD panel. For details, see section 3.1, Restart and shutdown.

4.1 Restart and shutdown

The server can be restarted and shutdown via the LCD panel.

4.1.1 How to restart the Management Server

1.Press Enter to display the Main Menu screen.

2.From the Main Menu screen, use the Up or Down arrow to select Commands.

3.Press Enter to confirm your selection.

4.From the Commands menu, use the Up or Down arrow to select Restart and press Enter.

5.You will be asked to confirm this action on the following screen. At the Restart? prompt, use the Up or Down arrow to select Yes and press Enter to confirm.

16