TANDBERG Management Server Quick Setup Guide
5.Move between characters by using the Up and Down arrows. Edit values by pressing Enter and using the Up or Down arrow to modify. Press Enter again to confirm the value, or press Return to restore the value to its previous state.
6.When finished editing the address, press Return. You will be asked to confirm your address entry on the following screen. At the Save Changes? Prompt, use the Up or Down arrow to select Yes and press Enter to confirm.
7.Press Return to go back to the IP Settings menu.
8.Use the Up or Down arrow to select Subnet Mask and press Enter twice.
9.Repeat steps
10.Press Return to go back to the IP Settings menu.
11.Use the Up or Down arrow to select Default Gateway and press Enter twice.
12.Repeat steps
14