CallMuteOutgoing
CallTransfer
CallTransferToDirEntry
TANDBERG MPS API
User Guide
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand callmute call:2 mode:on
*r Result (status=OK): *r/end
OK
Command used to mute outgoing audio from a specific call.
Parameters:
•Call(r): <1..128> Reference to the call to be muted or unmuted.
•Mode(r): <On/Off> Denotes whether the call is to be muted or unmuted.
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand CallMuteOutgoing call:2 mode:on
*r Result (status=OK): *r/end
OK
Command used to transfer the H.323 party of a Gateway call to another H.323 party.
Parameters:
•GatewayCall(r): <1..80
•Number(r): <S: 0, 60>
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the call was not accepted by the system
•Description Textual description of the cause code.
Command used to transfer the H.323 party of a Gateway call to a H.323 directory entry in the local phone book.
Parameters:
•GatewayCall(r): <1..80>
•DirectoryEntry(r): <1..99>
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the call was not accepted by the system
•Description Textual description of the cause code.
49