LocalEntryAdd
LocalEntryDelete
TANDBERG MPS API
User Guide
•Window(r): <1..16>
•CallID(r): <1..176> Call.
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Command used to add a new entry to the locally stored Directory. The entry is stored in the first vacant position in the Directory.
Parameters:
•Name: <S: 0, 48> The entry’s name.
•Number: <S: 0, 60> The entry’s number.
•SecondNumber: <S: 0, 60> The entry’s second number (2XH221 number).
•SubAddress: <S: 0, 60> The entry’s sub address.
•CallRate:
<1xh221/2xh221/64/128/192/256/320/384/H0/512/768/1152/1472/15 36/1920/Tlph> The callrate to use when calling this entry.
•Restrict: <On/Off> Whether to use restrict or not when calling this entry.
•NetProfile: <1..7> The Net Profile to use when calling this entry.
•NetworkId: <1..32>
•NetworkModule: <1..6>
OK Result parameters:
•LocalEntryId: <1..250> Reference to the Directory position the entry is stored.
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand localentryadd name:”John Galt” number:666
*r Result (status=OK): LocalEntryId: 17
*r/end
OK
Command used to delete an entry in the locally stored Directory.
Parameters:
•LocalEntryId(r): <1..99> Reference to the entry to delete.
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand localentrydelete localentryid:66
60