DialLocalEntry
DisconnectCall
DisconnectGWCall
TANDBERG MPS API
User Guide
•Cause: <1…> Cause code specifying why the call was not accepted by the system
•Description Textual description of the cause code.
Command used to dial a number from the locally stored directory.
Parameters:
•Conference(r): <1..35>
•LocalEntryId(r): <1..99> Reference to the directory entry to be dialed.
OK Result parameters:
•CallRef: <1..96> Reference to the call. To be used as reference when monitoring the call.
•LogTag: <1…> Unique reference to call. Identifies the call in the call log.
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the call was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand diallocalentry localentryid:15
*r Result (status=OK): CallRef: 1 LogTag: 312
*r/end
OK
Command used to disconnect a call.
Parameters:
•Call(r): <1..176> Reference to the call to be disconnected.
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand disconnectcall call:9
*r Result (status=OK): *r/end
OK
Command used to disconnect a gateway call.
Parameters:
•GatewayCall(r): <1..80> Reference to the call to be disconnected.
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not
56