Easy Start
This section shows the basic operation (projector connecting with the computer). For details, see the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
3
8
STANDBY/ON | 8 STANDBY button |
button |
6 | O/Q buttons |
6 | INPUT buttons |
4 | Zoom ring |
4 Focus ring
4 HEIGHT ADJUST lever
3
6
5
6
5
ON button
INPUT buttons
Adjustment
buttons
(P/R/O/Q)
KEYSTONE button
1. Place the projector facing a wall or a screen | _P. 18 |
2.Connect the projector to the computer and plug the power cord into the AC socket of the projector
When connecting equipment other than a computer, see pages |
|
22 and 23. | _PP. 21, 24 |
|
3. Open the lens shutter fully and then turn the projector on
On the projector On the remote control
_P. 25
16