Sharp XR-55X, XR-50S appendix Standby Mode, Checking the Lamp Life Status

Page 56

Adjusting the Projector Function (“PRJ-ADJ1/2” Menu) (Continued)

Menu operation n Page 39

STANDBY Mode

When set to “Eco”, power consumption is reduced in Standby mode.

	Selectable	Description
	items	Description
	items

	Eco	The monitor output and RS-232C are
		switched off in Standby mode.

	Quick Start	The monitor output and RS-232C are
		activated even if the projector is in
		Standby mode.

DLP® LinkTM (XR-55X only)

See the Operation Manual for Stereoscopic 3D Projection provided separately.

DLP® LinkTM Invert (XR-55X only)

See the Operation Manual for Stereoscopic 3D Projection provided separately.

Returning to the Default Settings

This function allows you to initialize the settings you have made in the projector.

Note

•The following items or menu cannot be initialized.

-Resolution

-Language

-Lamp Timer (Life)

-System Lock

Checking the Lamp Life Status

You can conﬁrm the cumulative lamp usage time and the remaining lamp life (percentage).

Lamp usage condition		Remaining lamp life

	“Life”	100%	5%

Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		4,000 hours	200 hours
set to “On”

Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		2,000 hours	100 hours
set to “Off”

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

•The lamp life may vary depending on the usage condition.

52

Image 56

Contents XR-55X XR-50S Model No Serial No Iii Page IntroductionENGLISH Void the users authority to operate this equipmentInformation Sharp Plaza, Mahwah, New Jersey TEL 1-800-BE-SHARPUsing the Menu Screen For Future ReferenceContents Adjusting the Projector Function PRJ-ADJ1/2 Menu ReferenceCleaning Power SourcesAccessories Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function Page Accessories Optional accessoriesPart Names and Functions Front ViewRear View Terminals Break Timer button Picture Mode buttonCLICK/EFFECT button 34 For displaying the break timeUsable Range Remote control signal transmittersInserting the Batteries Setup and Projection Easy StartTurn the computer on Turn the power off On the remote ControlStandard Setup Front Projection Setting Up the ProjectorSetting Up the Projector Signal Input Normal Mode Signal Input 169 ModeScreen Size and Projection Distance Screen Lens centerProjection PRJ Mode Ceiling-Mount SetupConnecting the Projector to Other Equipment Terminals on the ProjectorConnecting the Projector to Other Equipment Monitor OUT Controlling the Projector by a Computer Connecting the Power CordAC socket Power cord To AC outlet supplied Turning the Projector On Power indicator Lamp indicatorTurning the Projector On/Off About the Setup Guide Adjusting the Projected Image Adjusting the FocusPress Enter to exit the Setup Guide screen Image ProjectionAdjusting the Height Adjusting the Picture SizeUse the rear adjustment foot to make the projector level Make small adjustments Height Adjust leverAdjustment buttons P/R/O/Q Return button Keystone button On-screen display Keystone Correction modeCorrecting Trapezoidal Distortion Press KeystoneInput buttons AV Mute button VOL +/- Volume buttons Buttons Switching the Input ModeAdjusting the Volume Resize Mode Press ResizeAbout Copyrights Operating with the Remote Control Displaying and Setting the Break TimerUsing the Spot Function Switching the Eco+Quiet ModeAuto Sync Auto Sync Adjustment Selecting the Picture ModeFreezing a Moving Image Displaying an Enlarged Portion of an ImageUsing the Remote Control as the Wireless Computer Mouse When moving the cursorWhen left-clicking When right-clickingMenu Items Picture menuCOMPUTER/COMPONENT Projector adjustment PRJ-ADJ1/2 menu Using the Menu Screen Menu Selections Quick Start MenuPress Menu ExampleExample Adjusting Bright Quick Start MenuMenu Selections Complete Menu Following items can be conﬁgured on the Quick Start MenuTo adjust the projected Image while watching itMenu operation n Picture Adjustment Picture MenuSelecting the Picture Mode Adjusting the Image Adjusting the Color TemperatureAdjusting the Colors Adjusting Hue, Saturation, or ValueReducing Image Noise DNR Selecting the Film ModeEco+Quiet Resolution Setting Signal Adjustment SIG-ADJ MenuSignal Type Setting Setting the Video Setup When reproducing Ntsc signals in PAL video equipmentAdjusting the Projected Image SCR-ADJ Menu Setting the Resize ModeAdjusting the Image Position Keystone CorrectionSetting the Overscan Setting the On-screen DisplayClosed Caption For Americas onlySelecting the Setup Guide Selecting the Background ImageReversing/Inverting Projected Images Selecting the Wall ColorAuto Sync Auto Sync Adjustment Auto Power Off FunctionSpeaker Setting Auto Restart FunctionSystem Lock Function Adjusting the Projector Function PRJ-ADJ1/2 MenuFan Mode Setting Setting the Function Button Operation Keylock FunctionSelecting the Quick Start Menu Select On, then press EnterStandby Mode Checking the Lamp Life StatusMaintenance Cleaning the projectorMaintenance Indicators About the temperature warning indicatorRed on Abnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp Removing and Installing the Lamp Unit Remove the lamp unit coverLamp unit STANDBY/ON button AC socketResetting the Lamp Timer Connecting Pin Assignments COMPUTER/COMPONENT input and COMPUTER/COMPONENT outputUSB Terminal Type B USB connector RS-232C Speciﬁcations and Commands Computer controlCommunication conditions Basic formatCommands Compuer ProjectorRGB PAL CC1 Computer Compatibility Chart ComputerTroubleshooting 21-2453, 54 For Sharp Assistance Speciﬁcations Dimensions Kensington Security Standard connector ·················13 IndexAppendix

Related manuals

Manual 77 pages 60.28 Kb