Sharp XG-PH70X-N Removing and Installing the Lamp Unit, Disconnect the power cord

Page 99

Removing and Installing the Lamp Unit

Info

•Ensure the lamp unit is removed using the handle. Ensure the glass surface of the lamp unit or the inside of the projector are not touched.

•To avoid injury to yourself and damage to the lamp, make sure you carefully follow the steps below.

•Do not loosen other screws except for the lamp unit cover and lamp unit.

(Only the silver screws are loosened.)

1 Press on the projector or on the remote control to put the projector into standby mode.

•Wait until the cooling fan stops.

Warning!

•Do not remove the lamp unit from the projector right after use.The lamp and parts around the lamp will be very hot and may cause burn or injury.

Lamp unit 1

AN-PH7LP1

Optional

accessories

Lamp unit 2

AN-PH7LP2

STANDBY button

2 Disconnect the power cord.

•Unplug the power cord from the AC socket.

•Leave the lamp until it has fully cooled down (about 1 hour).

3 Remove the lamp unit cover.

•Loosen the user service screw (1) that

secures the lamp unit cover. Remove the lamp unit cover (2).

1

Power cord

2

Appendix

 

User service screw

-97

Page 98 Page 100
Image 99
Page 98 Page 100
Contents XG-PH70X Special Note for Users in the U.K Model No Serial NoIntroduction Product Disposal Operation Buttons used in thisPreparing ContentsUsing Reference When you want to view the setup manual For Windows¨For Macintosh¨ Power-Cord Protection CleaningAccessories Power SourcesAvoid locations with extremes of tem- perature Rest your eyes occasionallyDo not block the intake and exhaust vents Using the projector in other countriesTemperature monitor function Optional lens installationCable AccessoriesSupplied accessories Optional accessoriesScreen Throw DistanceOptional lenses LensProjector Part Names and FunctionsTemperature warning indicator About the Indicators on the ProjectorPower indicator Lamp indicators 1Input 1 terminal Projector Side ViewClick/UNDO button Mouse/adjustment button 19á56 //\ Remote ControlInserting the Batteries Using the Remote ControlWhen using the remote control Usable RangeSwitching the Remote Control Mode Using the Remote Control with a Signal CableUsing the Remote Control as a Wireless Computer Mouse Quick Start Setup and ProjectionAdjust the angle Setting Up the Projector Setting Up the ProjectorSet to Front Projecting a Reversed ImageINPUT/OUTPUT Terminals and Connectable Main Equipment ConnectionsSamples of Cables for Connection You may need other cables or connectors not listed belowSamples of Cables for Connection Connecting with the RGB Cable Connecting to a ComputerSide view Connecting with a 5 BNC to 15-pin D-sub CableConnections Connecting with a DVI Digital CableConnecting to Video Equipment Select the input signal type of the video equipment. See Connecting to RGB Video Equipment with a 5 RCA RGB Cable Connections Connecting with an S-video Cable or a Composite Video Cable Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cableConnecting to a Monitor That Has an RGB Input Terminal Connecting to an Amplifier or Other Audio EquipmentTurning the Projector On Connecting the Power CordTurning the Power Off Put Turning the Projector On/OffShifting the Lens Image ProjectionLens Shift button Using the Adjustment FeetPress on the projector or on the remote control While lifting the projector, rotate the adjustment feetAdjusting the Focus Adjusting the Projected Image SizeZoom button Focus button Focus buttons Zoom buttons Select the type of the keystone correction Correcting Trapezoidal DistortionGeometric Adjustment Press or to set the posi- tionMatch screen’s four sides to green test pattern Keystone Press or to set the po- sition Adjustment withPress , , \ or to correct Image distortionInput buttons Switching the Input ModeDisplaying an Enlarged Portion of an Image Adjusting the VolumePress on the remote control Turning Off the Sound TemporarilyFreezing a Moving Image Selecting the Picture ModePress on the remote control to cancel the operation Undo button Picture Mode buttonMouse/adjustment button //\ Undo button Resize ModeVideo Black Screen button Displaying and Setting the Break TimerButton Adjustment Displaying the Black ScreenFollowing shows the items that can be set in the projector Menu ItemsMenu Items S. menu Input 1 / Input 2 / Input 3 Main Menu Options 1 menuOptions 2 menu Language menu Status menu Example Picture screen menu for Input 1 RGB mode Using the Menu ScreenMenu Selections Adjustments Example Adjusting BrightSingle adjustment item To adjust the pro- jected image while viewing itPress or to select the item you want to adjust Press \ or to adjust the item selectedExample Setting OSD Display Menu Selections SettingsPress or to select the item you want to set Sub menuMenu screen will disappear Picture Adjustment Picture menu Adjusting the ImageSelect a picture mode before adjusting the im- age Emphasizing the Contrast Adjusting the Color TemperatureSelecting the Progressive Mode Reducing Image Noise DNRMake sure to set DNR to OFF in the following cases Input 1/INPUT Signal Type SettingSelecting the Target Color Selecting the Color Repro- duction ModeExample C.M.S. screen menu Description of C.M.S. Adjustment Color Management System C. M. S. menuExample C.M.S. screen menu Description of Chromatic Value Setting the Brightness of the Target ColorSetting the Chromatic Value of the Target Color Example C.M.S. screen menu Description of BrightnessExample C.M.S. screen menu Description of Hue Setting the Hue of the Target ColorResetting User-defined Color Settings Example C.M.S. screen menu Description of ResetExample C.M.S. screen menu Overview of All Color Set- tingsExample Fine Sync screen menu for Input 1 RGB mode Computer Image Adjustment Fine Sync menuAdjusting the Computer Image Saving Adjustment SettingsSpecial Mode Setting Selecting Adjustment Set- tingsUsed to automatically adjust a computer image Checking the Input SignalAuto Sync Adjustment Description of Auto Sync AdjustmentUsed to set the display during Auto Sync Auto Sync Display FunctionExample Audio screen menu Description of Adjustment Items Audio Adjustment Audio menuAdjusting the Audio Setting the Audio Output TypeExample Audio screen menu Description of Speaker Settings Speaker SettingSelectable Items of Resize Mode Using the Options 1 MenuSetting the Resize Mode Example Options 1 screen menu for Input 1 RGB modeSetting On-screen Display Description of OSD Display SettingsShifting the Projected Im- age Vertically Digital Shift Capturing Projected Images Setting the Video SystemSelecting the Startup Image Selecting the Background ImageDetecting the Input Sig- nals Automatically Eco ModePress the 4 buttons on the remote Auto Power Off FunctionSelect System Lock on the Op Tions 1 menu, then pressEnter the same keycode in Recon- firm When the System Lock is setWhen the system lock is set Setting a Password If You Forget Your PasswordExample Options 2 screen menu Setting the Lamp Mode Example Options 2 screen menu Description of Lamp ModeChecking the Lamp Life Status Description of Stack Setting Reversing/Inverting Pro- jected ImagesExample Options 2 screen menu Description of PRJ Modes Select OK, and then press Shortcut to Make Projector Stack SettingsLocking the Operation But- tons on the Projector Select Pair Stack on the Option Menu, and then pressExample Options 2 screen menu Description of Set Inputs Selecting the Fan ModeExample Options 2 screen menu Description of Fan Mode Bypassing Unused Input SelectionsDirect Power On Function Selecting the Transmis- sion Speed RS-232CExample Options 2 screen menu Description of RS-232C Description of LAN/RS232C Monitor Output SettingsLAN/RS232C Setting Example Options 2 screen menu Description of Monitor OutSet the TCP/IP manually Dhcp Client SettingTCP/IP Setting Example Options 2 screen menu Description of Dhcp ClientDescription of TCP/IP Service ModeEnter Gateway using , , and \, then press Only the service centers use the menu. Do not use the menuReturning to the Default Settings Example Status screen menu Selecting the On-screen Display LanguageOverview of All Menu Set- tings Example Language screen menuCleaning the lens MaintenanceCleaning the projector Cleaning the air vents and the intake vent coverMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Temperature is Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Disconnect the power cordRemove the lamp unit cover Remove the lamp unit Insert the new lamp unitReplace the lamp unit cover Reset the lamp timer after replacing the lamp Resetting the Lamp TimerConnect the power cord Reset the lamp timerComputer Compatibility Chart Computer100 101 DTV102 Troubleshooting103 Problem Check104 For Sharp Assistance105 Specifications106 Glossary107 IndexSharp Corporation

XG-PH70X-N, XG-PH70X specifications

The Sharp XG-PH70X and XG-PH70X-N are high-performance projectors designed for professionals who require high-quality images and versatile connectivity options. These models offer a perfect blend of advanced technology and user-friendly features, making them ideal for a variety of applications, from corporate presentations to educational settings.

One of the standout features of the XG-PH70X series is its impressive brightness level, peaking at 7,000 lumens. This high lumen output ensures clear and vivid images even in well-lit environments, which is crucial for maintaining visibility during presentations or lectures. The XG-PH70X utilizes Sharp’s proprietary DLP technology, which is renowned for delivering sharp, vibrant colors and high contrast ratios. This technology is particularly effective in producing images that are both detailed and lifelike.

In terms of resolution, the XG-PH70X supports native WUXGA (1920 x 1200), allowing it to display full HD content with impressive clarity. The projector also features a dynamic contrast ratio that enhances the depth and richness of the projected images, ensuring that both dark and bright scenes are rendered accurately.

Connectivity options are another strong point of the XG-PH70X series. The projectors are equipped with multiple input ports, including HDMI, DisplayPort, and VGA, allowing for seamless integration with various devices such as laptops, Blu-ray players, and media servers. This versatility makes it easy to connect and display content from multiple sources.

Moreover, the XG-PH70X and XG-PH70X-N models come with advanced networking capabilities, including support for wired and wireless LAN connections. This feature allows users to share content from their devices effortlessly, contributing to a more collaborative and engaging presentation experience.

The projectors also offer an extended lamp life, which reduces maintenance costs and downtime. With options for eco-friendly modes, users can optimize the projector’s performance based on their specific needs, further enhancing its usability.

Portability is also a key feature, as these projectors are designed to be lightweight and easy to transport. This makes them suitable for traveling professionals who may need to set up presentations in various locations.

In summary, the Sharp XG-PH70X and XG-PH70X-N projectors are engineered to deliver exceptional performance, versatility, and ease of use. With their high brightness, advanced connectivity options, and user-friendly features, they are well-suited for demanding professional environments.
Top Page Image Contents