Sharp XG-PH70X-N operation manual Maintenance Indicators, About the temperature warning indicator

Page 96

Maintenance Indicators

■The warning lights on the projector indicate problems inside the projector.

■If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter the standby mode. After the projector has entered the standby mode, follow the procedures given below.

Maintenance Indicators

Power indicator

Lamp indicators 1, 2

Temperature warning indicator

About the temperature warning indicator

If the temperature inside the projector increases, due to blockage of the air vents, or the setting location,

“” will illuminate in the lower left corner of the picture. If the temperature keeps on rising, the lamp will turn off and the temperature warning indicator will blink, the cooling fan will run for a further 90 seconds, and

then the projector will enter the standby mode. After “” appears, ensure you perform the measures described on page 95.

About the lamp indicator

“Change The Lamp. (LAMP 2)” is displayed when the remain- ing life of the lamp 2 becomes 5% or less.

■When the remaining lamp life becomes 5% or less, “” (yellow) and “Change The Lamp. (LAMP 1/2)” will be displayed on the screen.

■When the percentage becomes 0%, it will change to “” (red), the lamp will automatically turn off. At this time, the lamp indicator will illuminate in red.

If you try to turn on the projector a fourth time without replacing the lamp, the lamp whose life is 0% will not light up.

-94

Page 95 Page 97
Image 96
Page 95 Page 97
Contents XG-PH70X Model No Serial No Special Note for Users in the U.KIntroduction Product Disposal Buttons used in this OperationContents PreparingUsing Reference When you want to view the setup manual For Windows¨For Macintosh¨ Cleaning AccessoriesPower Sources Power-Cord ProtectionRest your eyes occasionally Avoid locations with extremes of tem- peratureUsing the projector in other countries Temperature monitor functionOptional lens installation Do not block the intake and exhaust ventsAccessories Supplied accessoriesOptional accessories CableThrow Distance Optional lensesLens ScreenPart Names and Functions ProjectorAbout the Indicators on the Projector Power indicatorLamp indicators 1 Temperature warning indicatorProjector Side View Input 1 terminalRemote Control Click/UNDO button Mouse/adjustment button 19á56 //\Using the Remote Control When using the remote controlUsable Range Inserting the BatteriesUsing the Remote Control with a Signal Cable Switching the Remote Control ModeUsing the Remote Control as a Wireless Computer Mouse Setup and Projection Quick StartAdjust the angle Setting Up the Projector Setting Up the ProjectorProjecting a Reversed Image Set to FrontConnections INPUT/OUTPUT Terminals and Connectable Main EquipmentYou may need other cables or connectors not listed below Samples of Cables for ConnectionSamples of Cables for Connection Connecting to a Computer Connecting with the RGB CableConnecting with a 5 BNC to 15-pin D-sub Cable Side viewConnecting with a DVI Digital Cable ConnectionsConnecting to Video Equipment Select the input signal type of the video equipment. See Connecting to RGB Video Equipment with a 5 RCA RGB Cable Connections Connecting with an S-video Cable or a Composite Video Cable When connecting to the LAN terminal using a LAN cable Controlling the Projector by a ComputerConnecting to an Amplifier or Other Audio Equipment Connecting to a Monitor That Has an RGB Input TerminalConnecting the Power Cord Turning the Power Off PutTurning the Projector On/Off Turning the Projector OnImage Projection Shifting the LensUsing the Adjustment Feet Press on the projector or on the remote controlWhile lifting the projector, rotate the adjustment feet Lens Shift buttonAdjusting the Focus Adjusting the Projected Image SizeZoom button Focus button Focus buttons Zoom buttons Correcting Trapezoidal Distortion Select the type of the keystone correctionGeometric Adjustment Press or to set the posi- tionMatch screen’s four sides to green test pattern Keystone Adjustment with Press , , \ or to correctImage distortion Press or to set the po- sitionSwitching the Input Mode Input buttonsAdjusting the Volume Press on the remote controlTurning Off the Sound Temporarily Displaying an Enlarged Portion of an ImageSelecting the Picture Mode Press on the remote control to cancel the operationUndo button Picture Mode button Freezing a Moving ImageResize Mode Mouse/adjustment button //\ Undo buttonVideo Displaying and Setting the Break Timer Button AdjustmentDisplaying the Black Screen Black Screen buttonMenu Items Following shows the items that can be set in the projectorMenu Items S. menu Options 1 menu Input 1 / Input 2 / Input 3 Main MenuOptions 2 menu Language menu Status menu Using the Menu Screen Menu Selections AdjustmentsExample Adjusting Bright Example Picture screen menu for Input 1 RGB modeTo adjust the pro- jected image while viewing it Press or to select the item you want to adjustPress \ or to adjust the item selected Single adjustment itemMenu Selections Settings Example Setting OSD DisplayPress or to select the item you want to set Sub menuMenu screen will disappear Picture Adjustment Picture menu Adjusting the ImageSelect a picture mode before adjusting the im- age Adjusting the Color Temperature Emphasizing the ContrastSelecting the Progressive Mode Reducing Image Noise DNRMake sure to set DNR to OFF in the following cases Signal Type Setting Input 1/INPUTSelecting the Color Repro- duction Mode Example C.M.S. screen menu Description of C.M.S. AdjustmentColor Management System C. M. S. menu Selecting the Target ColorSetting the Brightness of the Target Color Setting the Chromatic Value of the Target ColorExample C.M.S. screen menu Description of Brightness Example C.M.S. screen menu Description of Chromatic ValueSetting the Hue of the Target Color Resetting User-defined Color SettingsExample C.M.S. screen menu Description of Reset Example C.M.S. screen menu Description of HueOverview of All Color Set- tings Example C.M.S. screen menuComputer Image Adjustment Fine Sync menu Adjusting the Computer ImageSaving Adjustment Settings Example Fine Sync screen menu for Input 1 RGB modeSelecting Adjustment Set- tings Special Mode SettingChecking the Input Signal Auto Sync AdjustmentDescription of Auto Sync Adjustment Used to automatically adjust a computer imageAuto Sync Display Function Used to set the display during Auto SyncAudio Adjustment Audio menu Adjusting the AudioSetting the Audio Output Type Example Audio screen menu Description of Adjustment ItemsSpeaker Setting Example Audio screen menu Description of Speaker SettingsUsing the Options 1 Menu Setting the Resize ModeExample Options 1 screen menu for Input 1 RGB mode Selectable Items of Resize ModeSetting On-screen Display Description of OSD Display SettingsShifting the Projected Im- age Vertically Digital Shift Setting the Video System Capturing Projected ImagesSelecting the Background Image Selecting the Startup ImageEco Mode Detecting the Input Sig- nals AutomaticallyAuto Power Off Function Select System Lock on the OpTions 1 menu, then press Press the 4 buttons on the remoteWhen the System Lock is set Enter the same keycode in Recon- firmWhen the system lock is set Setting a Password If You Forget Your PasswordExample Options 2 screen menu Setting the Lamp Mode Example Options 2 screen menu Description of Lamp ModeChecking the Lamp Life Status Description of Stack Setting Reversing/Inverting Pro- jected ImagesExample Options 2 screen menu Description of PRJ Modes Shortcut to Make Projector Stack Settings Locking the Operation But- tons on the ProjectorSelect Pair Stack on the Option Menu, and then press Select OK, and then pressSelecting the Fan Mode Example Options 2 screen menu Description of Fan ModeBypassing Unused Input Selections Example Options 2 screen menu Description of Set InputsDirect Power On Function Selecting the Transmis- sion Speed RS-232CExample Options 2 screen menu Description of RS-232C Monitor Output Settings LAN/RS232C SettingExample Options 2 screen menu Description of Monitor Out Description of LAN/RS232CDhcp Client Setting TCP/IP SettingExample Options 2 screen menu Description of Dhcp Client Set the TCP/IP manuallyService Mode Enter Gateway using , , and \, then pressOnly the service centers use the menu. Do not use the menu Description of TCP/IPReturning to the Default Settings Selecting the On-screen Display Language Overview of All Menu Set- tingsExample Language screen menu Example Status screen menuMaintenance Cleaning the projectorCleaning the air vents and the intake vent cover Cleaning the lensMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Temperature is Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Disconnect the power cordRemove the lamp unit cover Remove the lamp unit Insert the new lamp unitReplace the lamp unit cover Resetting the Lamp Timer Connect the power cordReset the lamp timer Reset the lamp timer after replacing the lampComputer Compatibility Chart Computer100 DTV 101Troubleshooting 102Problem Check 103For Sharp Assistance 104Specifications 105Glossary 106Index 107Sharp Corporation

XG-PH70X-N, XG-PH70X specifications

The Sharp XG-PH70X and XG-PH70X-N are high-performance projectors designed for professionals who require high-quality images and versatile connectivity options. These models offer a perfect blend of advanced technology and user-friendly features, making them ideal for a variety of applications, from corporate presentations to educational settings.

One of the standout features of the XG-PH70X series is its impressive brightness level, peaking at 7,000 lumens. This high lumen output ensures clear and vivid images even in well-lit environments, which is crucial for maintaining visibility during presentations or lectures. The XG-PH70X utilizes Sharp’s proprietary DLP technology, which is renowned for delivering sharp, vibrant colors and high contrast ratios. This technology is particularly effective in producing images that are both detailed and lifelike.

In terms of resolution, the XG-PH70X supports native WUXGA (1920 x 1200), allowing it to display full HD content with impressive clarity. The projector also features a dynamic contrast ratio that enhances the depth and richness of the projected images, ensuring that both dark and bright scenes are rendered accurately.

Connectivity options are another strong point of the XG-PH70X series. The projectors are equipped with multiple input ports, including HDMI, DisplayPort, and VGA, allowing for seamless integration with various devices such as laptops, Blu-ray players, and media servers. This versatility makes it easy to connect and display content from multiple sources.

Moreover, the XG-PH70X and XG-PH70X-N models come with advanced networking capabilities, including support for wired and wireless LAN connections. This feature allows users to share content from their devices effortlessly, contributing to a more collaborative and engaging presentation experience.

The projectors also offer an extended lamp life, which reduces maintenance costs and downtime. With options for eco-friendly modes, users can optimize the projector’s performance based on their specific needs, further enhancing its usability.

Portability is also a key feature, as these projectors are designed to be lightweight and easy to transport. This makes them suitable for traveling professionals who may need to set up presentations in various locations.

In summary, the Sharp XG-PH70X and XG-PH70X-N projectors are engineered to deliver exceptional performance, versatility, and ease of use. With their high brightness, advanced connectivity options, and user-friendly features, they are well-suited for demanding professional environments.
Top Page Image Contents