INSTALLATION INSTRUCTIONS
7. BRICK REMOVAL (all)
(Tools required – None)
7.1The bricks must be removed and replaced in the correct order, as shown in diagram 13/14/15, after removing the baffles and grate system.
13 |
| Riva 40 |
|
|
|
|
|
|
14 |
| Riva 55 |
|
|
|
|
|
|
15 | Riva 66 |
Riva 66 Avanti
Riva 76 as per above, but brick number 7 is made up of 2 parts.
7.2Replace the bricks in the reverse order from removal.
8. FITTING THE FRAME (RIVA)
(3 sided ‘Profil’ frame shown)
(Tools required – 2.5mm A/F Hex socket key)
8.1The frame is in 2 parts, the lower frame and the main 3 sided section.
To fit the frame:
• Locate the main frame on the top clips on the firebox,
See diagram 16
16 | Top clip (3 places) |
|
Rotate backwards to fit
PR7011
•Rotate the main frame into position on the front of the appliance body
•Fix in place with the trim fixing screws
•Fix the lower frame into position using the two fixing screws supplied, See diagram 17
17
Main frame fixing (1 screw each side)
Lower frame fixing (1 screw each side)
Lower frame not required on
25
