MAINTENANCE and SERVICING
1.4Using the appliance for the first time:
•Burn at a low output for the first day of use
This allows the seals, fixing glues and paint to fully cure.
1.5During this time the appliance may give off some unpleasant odours:
• Keep the room well ventilated to avoid a
1.6Your Stovax dealer can carry out service and maintenance.
2.REMOVAL OF THE LOG GUARD
2.1To remove the Log guard:
•Lift Log Guard clear of the supporting brackets
•Rotate to clear the sides of the door opening.
Do not use appliance without the log guard in position.
3.DOOR REMOVAL (all)
3.1See Section 3a and 3b Door Removal Riva - 3a and Avanti - 3b in Installation section.
4.ASHPAN DOOR REMOVAL (riva)
4.1See Section 4 Ashpan Door removal (Riva) in Installation section.
5.BAFFLE REMOVAL (all)
5.1See Section 5, Baffle Removal (all) in Installation Section.
6.FIREGRATE REMOVAL (all)
6.1See Section 6a and 6b, Firegrate Removal a) Riva and b) Avanti in Installation Section.
7. BRICK REMOVAL (all)
7.1See Section 7 Firebrick Removal in Installation section.
8.FITTING THE FRAME (RIVA)
8.1See Section 8 Fitting the Frame in Installation section.
9.FITTING CONVECTION AIR DUCTS
9.1See Section 9 Fitting Convection Air Ducts in Installation section.
10.FITTING A NEW DOOR GLASS ALL MODELS
1 | Riva |
|
Door Rope Seal
Fixing Screw
Trim / Frame
Glass Edge
Seal Tape
Glass
Door
2 |
| Riva Avanti |
|
|
|
Door Rope Seal
Fixing Screw
Trim / Frame
Glass Edge
Seal Tape
Glass
Door
PR7051
10.1To maintain the safe use of your appliance you may need to replace a damaged door glass. To complete this operation:
Riva 66, See 3A
•Remove the door, by opening 25mm, removing the hinge pins and lifting the door free of the hinge blocks
29