Visioneer XP 450 manual Creating a NEW Button Configuration, To create a new configuration

16VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE

CREATING A NEW BUTTON CONFIGURATION

You cannot change settings of the preset (default) configurations. To use settings other than those offered by the preset configurations, you must create a new configuration. You can do this either by copying a preset configuration and making the desired changes or by creating a new configuration from scratch.

To create a new configuration:

1.Scroll the applications in the Select Destination list and click the application for which you want to create a new configuration.

2.Do one of the following:

■Click the New button.

■Select a preset configuration and click the Copy button.

3.On the New Scan Configuration dialog box, type a name.

■If you are copying from a preset configuration, leave the name as is or change it as required.

Note: If you select a printer or other device in the Select Destinations list, the dialog box may have an additional tab for setting specific options for the particular device.