Visioneer XP 450 Here’s a sample of a manually selected output area

34VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE

Here’s a sample of a manually selected output area:

This is the area manually selected for scanning.

This is the image that appears on the PaperPort desktop when scanning is finished.

Lock Scaling

MANUALLY SETTING THE WIDTH AND LENGTH

The output dimensions at the bottom of the Scan Manager show the Width and Length of the scan area. You can set the area by typing numbers into those boxes.

To manually set the width and length:

1.Click in the Width or Length box and type a new dimension. The scan area box changes to reflect the new size.

2.To maintain the same width to length ratio, click the Lock Scaling icon next to the dimension.

With the Lock Scaling locked, when you type a new width or length, the other setting changes so the relative size of the scan area remains constant.