ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO | 51 |
ADJUSTING OUTPUT SIZE
The item you’re scanning may not fill the scanner glass. In that case you can preview the item and use the Auto Trim option to automatically eliminate the unwanted sections of the image.
You can also adjust the output size to scan only specific sections of an image. For example, if you’re scanning a photograph and want to focus on one section, adjusting the output size removes the rest of the photograph from the final scanned image.
The following figure shows the output size options:
To Auto Trim an item:
1.Select Auto Trim, and then click the Trim button.
The scanner senses the edges of the item on the glass and draws a dotted line around the image in the window.
Check to make sure the dotted line encloses the image you want.
A new Scan Info box on the lower left portion of the Scan Manager Pro shows the information for the autotrimmed area.