Vivitek D940VX, D935VX, D930TX manual DLP Projjecttor - User’s Manuall

Page 39

To connect to a network (LAN), refer to the following steps:

DLP Projjecttor – User’s Manuall

The Network function enables remote management and display of projector functions such as Power On/Off, Brightness, Contrast, and projector status information over a network (LAN) or from a stand alone PC or notebook.

To connect to a network (LAN), refer to the following steps:

1. Connect an RJ45 cable to LAN ports on the projector and a router or hub on the network.

2.Press the MENU button to open the OSD menu.

3.Press the cursor ◄► buttons to navigate to Installation II and select Network.

4.Select DHCP and press the cursor ◄► buttons to select On if the network has a DHCP server or router,

OR

If the network uses Static IP addresses, enter IP, Subnet, Gateway (optional), and DNS (optional) addresses in the fields provided.

The projector’s IP address must be in the same IP domain as the network and cannot occupy the same IP address as an existing device. For example, if the control PC or notebook re- sides at 192.168.000.010, the projector’s IP address must be 192.168.000.nnn (where nnn = 1 to 9 and 11 to 255—10 is occupied by the control PC).

5.Select Apply and press (Enter) / ► to confirm settings.

6.On the control PC, open a web browser and enter the IP address of the projector.

– 33 –

Image 39

Contents Copyright DisclaimerTrademark Recognition DLP Projjecttor-User’s Manuall Important Safety InformationSymbols Used General Safety InformationProjector Installation Notice Power SafetyPreface About this manual Main FeaturesCleaning the Projector Symbol ExplanationsMAINTENANCE AND SECURITY Table of ContentsSETUP AND OPERATION ON-SCREEN DISPLAY OSD MENU SETTINGSREGULATORY COMPLIANCE SPECIFICATIONSAvoid using the projector in dusty environments Packing ChecklistGETTING STARTED DLP Projjecttor - User’s ManuallD935VX / D940VX / D930TX Front-right View Views of Projector PartsD930TX does not have the zoom ring see LED Error Messages on page Top view-On-screen Display OSD buttons and LEDsRear view When installing, ensure that you use only UL Listed ceiling mounts Bottom viewRemote Control Parts SEE PAGE Projector and Remote Control Buttons Remote Control Operating Range2. Dispose of used batteries according to local ordinance regulations SETUP AND OPERATIONInserting the Remote Control Batteries 1. Only use AAA batteries Alkaline batteries are recommendedConnecting Input Devices Starting and Shutting down the Projector 1. Be sure to remove the lens cap before starting projector Security Lock Setting an Access Password Security LockService center will validate the owner and help reset the password Ensure the cables are in a safe location. You could trip over them Adjusting the Projector LevelThe projector table or stand should be level and sturdy Position the projector so that it is perpendicular to the screen4. The keystone control appears on the display Adjusting the Zoom ring VX Series only, Focus and Keystone1. Press the Volume +/- buttons on the remote control Adjusting the VolumeON-SCREEN DISPLAY OSD MENU SETTINGS Navigating the OSDOSD Menu Controls 4. Press the MENU button twice to close the OSD Setting the OSD LanguageSet the OSD language to your preference before continuing 2. Press the cursor button until Language is highlightedOSD Menu Overview OSD Sub-Menu Overview Image Menu Advanced Feature Press Enter / to enter the Color Manager sub menu Color ManagerComputer Menu Video/Audio Menu Press Enter / to enter the Audio sub menu AudioInstallation I Menu Installation II Menu DLP Projjecttor-User’s Manuall Peripheral Test OSD Menu SettingNetwork Lamp Hour ResetTo connect to a network LAN, refer to the following steps The Projector Web Server home page displays. In the example, the projector resides at IP address 3. Right-click on Local Area Connection, and select Properties 2. On the PC Laptop, select Start´ Control Panel´ Network Connections5. Click Properties DLP Projjecttor - User’s Manuall DLP Projjecttor-User’s Manuall Status Factory ResetMAINTENANCE AND SECURITY Replacing the Projection Lampb. Do not dispose this product with general household waste r - User’s Manual Resetting the Lamp 1. Do not use abrasive cleaners or solvents Cleaning the LensCleaning the Case Cleaning the ProjectorUsing the Kensington Lock TROUBLESHOOTING Common problems and solutionsTips for Troubleshooting Problem The image is blurred LED Error MessagesImage Problems Problem No image appears on the screenProblem The image is reversed Lamp ProblemsRemote Control Problems Problem The image is wider at the top or bottom trapezoid effectProblem The sound is distorted Audio ProblemsHaving the Projector Serviced Problem There is no soundD940VX SPECIFICATIONSSpecifications D935VXD940VX D935VX / D940VX / D930TX Projection Distance and Size TableProjection Distance vs. Projection Size D935VXS-VIDEO D935VX / D940VX / D930TX Timing Mode TableH-SYNC V-SYNCDLP Projector-User’s Manual Projector Dimensions Canada Safety CertificationsREGULATORY COMPLIANCE FCC Warning