Vivitek H9080FD user manual Noise Reduction Sub-Menu

Page 45

•Noise Reduction: To apply noise reduction to the source signal, select Noise Reduction from the IMAGE menu and press ENTER.

Figure 4-13: Noise Reduction Sub-Menu

Noise Reduction is useful for clearing up noisy images from interlaced SD sources.

•Noise Reduction (Simple Mode): Use the or buttons to adjust as desired, keeping in mind that reducing noise (which reduces high frequencies) may also soften the image.

•Noise Reduction Mode: Noise Reduction Mode allows or prevents access to the detailed noise reduction con- trols in this menu.

In most cases, Simple mode provides a sufficient level of control to produce the best picture from the most popu- lar sources. In Simple mode, only the Noise Reduction (top-most) slider is adjustable; the others are grayed out. Choose Advanced mode if you need more precise control over noise reduction. In Advanced mode, only the top slider is grayed out.

•General Noise Reduction: General Noise Reduction is temporal and spatial noise reduction for all types of inputs. The scene is analyzed for differences from frame to frame and reduces those differences that are not de- termined to be motion.

•Block Artifact Reduction: Use this control to reduce or eliminate so-called “block artifacts” in MPEG-compressed video signals (digital broadcasts or DVDs). Set it as needed to minimize distortion within horizontal and vertical block boundaries.

•Mosquito Noise Reduction: Use this control to reduce or eliminate so-called “mosquito noise” in MPEG-com- pressed video signals. Set it as needed to minimize distortion around the edges of moving objects, moving artifacts around edges and/or blotchy noise patterns superimposed over the objects.

•Overscan: Some television programs are produced based on the assumption that older television sets may not display the outer edges of the broadcast picture area. Overscan effectively hides these inactive, outer edges of the image. Choose one of the following:

•Off: This setting leaves the image as-is.

•Crop: This setting adds a mask at the left and right edges of the source active image equal to 3% of the dis- played horizontal resolution, and at the top and bottom edges equal to 3% of the displayed vertical resolution.

•Zoom: This setting adds a factor to the scaling of the source active image so that the vertical and horizontal resolutions are 106% of the size determined by the aspect ratio function. Anything outside of the original image area is removed.

Operation 45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents H9080FD Table of Contents Maintenance and Troubleshooting Copyright Copyright InformationDisclaimer About this manualImportant Safety Instructions FCC Part About This Manual IntroductionTarget Audience Textual and Graphic ConventionsUsing This Manual If you needTurn to Key Features and Benefits Description, Features and BenefitsParts List Additional Features of the H9080FDH9080FD at a Glance Controls and FunctionsH9080FD Top/ Rear/ Bottom View Component H9080FD I/O PanelSource H9080FD Key PadCONT, BRIGHT, Sharp H9080FD Remote ControlRemote Control InstallationIR Reception Angles Installation Type Installation ConsiderationsAmbient Light Advantages ConsiderationsEstimated Throw Distance Throw DistanceVertical and Horizontal Position Floor InstallationOther Considerations Folded OpticsVertical Lens Shift Lens ShiftHorizontal Lens Shift Mounting the H9080FD Adjusting the Projection AngleFloor Mounting Upright Ceiling Mounting InvertedConnections to the H9080FD Connecting Source Components to the H9080FDRGB Connections Component Video Connections 10 Composite and S-Video Connections 11 RS-232 Control System Connection RS-232 Controller ConnectionConnecting to AC Power Connecting an External IR ReceiverAdjusting the Picture Orientation Turning on the PowerCeiling Mode Changing the OSD LanguageLens Adjustments FocusZoom Vertical Lens Shift Horizontal Lens Shift Operation Using the On-Screen MenusSelecting an Aspect Ratio Selecting An Input SourceH9080FD OSD Menu Structure General PIP PIP Split Mode Memory Sub-Menu Image Aspect Ratio Settings Below Black Above Black 10 Typical Gray Bar Pattern for Adjusting Contrast 12 Typical Test Pattern for Adjusting Sharpness 13 Noise Reduction Sub-Menu 14 Overscan Examples 15 HSG Sub-Menu Advanced Operation 17 RGB Adjust Sub-Menu 18 Fine Sync Sub-Menu Setup Trigger commands are deactivated when a PIP source is active Info TroubleshootingMaintenance Cleaning the Intake and Exhaust VentsCleaning the Air Vents Symptom Possible Causes Solution Troubleshooting TipsSerial Interface Specifications Transfer SpecificationsSpecifications IR Codes and Keynames Remote Button Description RS-232 CommandsIR Codes and Keynames Operation Command Values Function Command Action on unit= RGB = PBP = LED Operations Commands H9080FD Specifications OpticsElectrical Mechanical Standard AccessoriesShows the H9080FD dimensions, in millimeters H9080FD DimensionsSupported Timings Sdtv Projection Distance and Screen Size Specifications Specifications Specifications

H9080FD specifications

The Vivitek H9080FD is a high-performance home cinema projector designed to deliver an exceptional viewing experience for cinephiles and home theater enthusiasts. This projector stands out with its impressive blend of advanced technologies, stunning image quality, and versatile features, making it a top choice for serious users.

One of the key highlights of the H9080FD is its native resolution of 1080p (1920 x 1080). This ensures that users enjoy sharp, detailed images with vibrant colors, leading to a truly immersive experience. The projector supports high dynamic range (HDR) content, which enhances the depth and realism of the visuals, providing a more lifelike representation of scenes. By leveraging HDR technology, viewers can witness greater contrast, more nuanced shadows, and brilliant highlights.

A standout feature of the Vivitek H9080FD is its advanced DLP (Digital Light Processing) technology, which allows for remarkable color accuracy and overall picture quality. DLP projectors are known for their reliability and longevity, and the H9080FD benefits from a robust design that ensures consistent performance over time.

In terms of brightness, the H9080FD shines bright with an impressive output of 2,500 lumens. This level of brightness ensures that the projector performs well even in environments that are not completely dark, giving users flexibility in installation and usage. Coupled with a high contrast ratio of 50,000:1, the projector delivers deep blacks and brilliant colors, contributing to a more dynamic viewing experience.

The connectivity options on the H9080FD are extensive, featuring HDMI inputs for easy association with modern devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, the projector supports 3D content, allowing audiences to enjoy films and games in an immersive format that pulls them into the action.

In conclusion, the Vivitek H9080FD is a powerful home theater projector that encompasses state-of-the-art technologies and robust features. With its impressive resolution, vibrant colors, high brightness, and extensive connectivity options, this projector is designed to satisfy even the most demanding home cinema aficionados. Whether used for movie nights, gaming, or large presentations, the H9080FD offers an unparalleled viewing experience that truly elevates home entertainment.
Top Page Image Contents