Vivitek H9080FD user manual Troubleshooting Tips, Symptom Possible Causes Solution

Page 56

5.2 Troubleshooting Tips

Table 5-1 provides some general guidelines for troubleshooting problems you may encounter with the H9080FD. If the suggested solutions fail to resolve the problem or if you encounter an issue not described here, please contact Vivitek Technical Support.

Symptom

Possible Cause(s)

Solution

 

 

 

The projector does not turn on.

• The H9080FD is not plugged in or

• Ensure that the H9080FD is

 

the AC outlet is not active.

plugged in and that the AC outlet

 

 

is active.

 

 

 

The remote control does not work

• The batteries have run out.

• Replace the batteries.

correctly.

• IR code set mismatch between

• Press and hold the LIGHT and

 

remote control unit and projector.

ENTER remote control buttons si-

 

 

multaneously until the remote control

 

 

back-lighting “blinks” (approximately

 

 

five seconds). Then, try again.

 

 

 

The projector is on and OSD menus

• Incorrect source selection.

• Select the correct source.

appear, but there is no video image

• Source component is not turned on.

• Turn on the source.

on-screen.

• Source component is connected

• Check cable connection from

 

incorrectly or not at all.

source component to projector.

 

 

 

A projected image from a DVD is

• DVD player is connected to the

• Turn off progressive scan on the

split or otherwise scrambled.

Component input and set to pro-

DVD player.

 

gressive scan mode.

 

 

 

 

Image is blurred.

• The lens is not correctly focused.

• Adjust the focus with the remote control.

 

 

 

Image is too bright and/or lacks defini-

• Contrast is set too high.

• Lower the contrast setting.

tion in the bright areas of the image.

 

 

 

 

 

Image appears “washed out” and/or

• Brightness is set too high.

• Lower the brightness setting.

dark areas appear too bright.

 

 

 

 

 

Colors in the image are swapped;

• The Red/Pr, Green/Y or Blue/Pb

• Ensure that the source outputs are

for example, reds appear blue or

outputs from the source are con-

connected to the correct H9080FD

vice versa.

nected to the wrong inputs on the

input.

 

H9080FD.

 

 

 

 

 

Table 5-1: Troubleshooting Chart

 

56Maintenance and Troubleshooting

Page 55 Page 57
Image 56
Page 55 Page 57
Contents H9080FD Table of Contents Maintenance and Troubleshooting Copyright Information CopyrightDisclaimer About this manualImportant Safety Instructions FCC Part Introduction About This ManualTarget Audience Textual and Graphic ConventionsTurn to Using This ManualIf you need Description, Features and Benefits Key Features and BenefitsAdditional Features of the H9080FD Parts ListControls and Functions H9080FD at a GlanceH9080FD Top/ Rear/ Bottom View H9080FD I/O Panel ComponentH9080FD Key Pad SourceH9080FD Remote Control CONT, BRIGHT, SharpInstallation Remote ControlIR Reception Angles Installation Considerations Installation TypeAmbient Light Advantages ConsiderationsThrow Distance Estimated Throw DistanceFloor Installation Vertical and Horizontal PositionFolded Optics Other ConsiderationsLens Shift Vertical Lens ShiftHorizontal Lens Shift Adjusting the Projection Angle Mounting the H9080FDFloor Mounting Upright Ceiling Mounting InvertedConnecting Source Components to the H9080FD Connections to the H9080FDRGB Connections Component Video Connections 10 Composite and S-Video Connections RS-232 Controller Connection 11 RS-232 Control System ConnectionConnecting an External IR Receiver Connecting to AC PowerTurning on the Power Adjusting the Picture OrientationCeiling Mode Changing the OSD LanguageZoom Lens AdjustmentsFocus Vertical Lens Shift Horizontal Lens Shift Using the On-Screen Menus OperationSelecting an Aspect Ratio Selecting An Input SourceH9080FD OSD Menu Structure General PIP PIP Split Mode Memory Sub-Menu Image Aspect Ratio Settings Below Black Above Black 10 Typical Gray Bar Pattern for Adjusting Contrast 12 Typical Test Pattern for Adjusting Sharpness 13 Noise Reduction Sub-Menu 14 Overscan Examples 15 HSG Sub-Menu Advanced Operation 17 RGB Adjust Sub-Menu 18 Fine Sync Sub-Menu Setup Trigger commands are deactivated when a PIP source is active Info Cleaning the Air Vents TroubleshootingMaintenanceCleaning the Intake and Exhaust Vents Troubleshooting Tips Symptom Possible Causes SolutionSpecifications Serial Interface SpecificationsTransfer Specifications RS-232 Commands IR Codes and Keynames Remote Button DescriptionIR Codes and Keynames Function Command Action on unit Operation Command Values= RGB = PBP = LED Operations Commands Electrical H9080FD SpecificationsOptics Standard Accessories MechanicalH9080FD Dimensions Shows the H9080FD dimensions, in millimetersSupported Timings Sdtv Projection Distance and Screen Size Specifications Specifications Specifications

H9080FD specifications

The Vivitek H9080FD is a high-performance home cinema projector designed to deliver an exceptional viewing experience for cinephiles and home theater enthusiasts. This projector stands out with its impressive blend of advanced technologies, stunning image quality, and versatile features, making it a top choice for serious users.

One of the key highlights of the H9080FD is its native resolution of 1080p (1920 x 1080). This ensures that users enjoy sharp, detailed images with vibrant colors, leading to a truly immersive experience. The projector supports high dynamic range (HDR) content, which enhances the depth and realism of the visuals, providing a more lifelike representation of scenes. By leveraging HDR technology, viewers can witness greater contrast, more nuanced shadows, and brilliant highlights.

A standout feature of the Vivitek H9080FD is its advanced DLP (Digital Light Processing) technology, which allows for remarkable color accuracy and overall picture quality. DLP projectors are known for their reliability and longevity, and the H9080FD benefits from a robust design that ensures consistent performance over time.

In terms of brightness, the H9080FD shines bright with an impressive output of 2,500 lumens. This level of brightness ensures that the projector performs well even in environments that are not completely dark, giving users flexibility in installation and usage. Coupled with a high contrast ratio of 50,000:1, the projector delivers deep blacks and brilliant colors, contributing to a more dynamic viewing experience.

The connectivity options on the H9080FD are extensive, featuring HDMI inputs for easy association with modern devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, the projector supports 3D content, allowing audiences to enjoy films and games in an immersive format that pulls them into the action.

In conclusion, the Vivitek H9080FD is a powerful home theater projector that encompasses state-of-the-art technologies and robust features. With its impressive resolution, vibrant colors, high brightness, and extensive connectivity options, this projector is designed to satisfy even the most demanding home cinema aficionados. Whether used for movie nights, gaming, or large presentations, the H9080FD offers an unparalleled viewing experience that truly elevates home entertainment.
Top Page Image Contents