Vivitek H9080FD user manual Trigger commands are deactivated when a PIP source is active

Page 53

•HDMI 1/HDMI 2: Enables or disables the HDMI 1 and HDMI 2 sources.

•RGB: Enables or disables the RGB source.

•Comp 1/Comp 2: Enables or disables the Component 1 and Component 2 sources.

•Video: Enables or disables the Composite video source.

Note

If either Component 1 or Video is enabled, SCART must be disabled.

 

•S-Video: Enables or disables the S-Video source.

•SCART: Enables or disables the SCART RGBS source.

Note

If SCART is enabled, both Component 1 and Video must be disabled.

 

•Auto Power Off: Set Auto Power Off to On to have the H9080FD turn itself off after 20 minutes of inactivity (no source signal present).

•Auto Power On: Set Auto Power On to On causes the projector to automatically power up when AC power is present. If the projector is plugged into a switched AC outlet, this allows the projector to be turned on using a wall switch instead of the remote control unit. If you do not need this capability, set Auto Power On to Off (this is the de- fault setting).

•Rear Projection: This control reverses all images and menus, and is necessary when the projector is used in rear- projection applications. The default is Off.

•Ceiling Mode: This control flips the image so the projector can be used in ceiling mounted installations.

•Trigger-1:Select the primary screen trigger condition:

•LED: Triggers the screen when the LED is turned on.

•16:9, Letterbox, 4:3, or 4:3 Narrow: Triggers the screen when the selected aspect ratio is active.

•RS232: Triggers the screen when the RS232 “Trigger On” command is received.

•Trigger-2:Select the secondary screen trigger condition (see descriptions for Trigger 1).

Note

Trigger commands are deactivated when a PIP source is active.

 

•Factory Reset: Select Factory Reset to restore all projector settings - except those listed below - to their factory-default values:

•LED Hours

•Model Name / Serial Number

•Language

•User Memory 1 / User Memory 2

Operation 53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents H9080FD Table of Contents Maintenance and Troubleshooting Copyright Copyright InformationDisclaimer About this manualImportant Safety Instructions FCC Part About This Manual IntroductionTarget Audience Textual and Graphic ConventionsTurn to Using This ManualIf you need Key Features and Benefits Description, Features and BenefitsParts List Additional Features of the H9080FDH9080FD at a Glance Controls and FunctionsH9080FD Top/ Rear/ Bottom View Component H9080FD I/O PanelSource H9080FD Key PadCONT, BRIGHT, Sharp H9080FD Remote ControlRemote Control InstallationIR Reception Angles Installation Type Installation ConsiderationsAmbient Light Advantages ConsiderationsEstimated Throw Distance Throw DistanceVertical and Horizontal Position Floor InstallationOther Considerations Folded OpticsVertical Lens Shift Lens ShiftHorizontal Lens Shift Mounting the H9080FD Adjusting the Projection AngleFloor Mounting Upright Ceiling Mounting InvertedConnections to the H9080FD Connecting Source Components to the H9080FDRGB Connections Component Video Connections 10 Composite and S-Video Connections 11 RS-232 Control System Connection RS-232 Controller ConnectionConnecting to AC Power Connecting an External IR ReceiverAdjusting the Picture Orientation Turning on the PowerCeiling Mode Changing the OSD LanguageZoom Lens AdjustmentsFocus Vertical Lens Shift Horizontal Lens Shift Operation Using the On-Screen MenusSelecting an Aspect Ratio Selecting An Input SourceH9080FD OSD Menu Structure General PIP PIP Split Mode Memory Sub-Menu Image Aspect Ratio Settings Below Black Above Black 10 Typical Gray Bar Pattern for Adjusting Contrast 12 Typical Test Pattern for Adjusting Sharpness 13 Noise Reduction Sub-Menu 14 Overscan Examples 15 HSG Sub-Menu Advanced Operation 17 RGB Adjust Sub-Menu 18 Fine Sync Sub-Menu Setup Trigger commands are deactivated when a PIP source is active Info Cleaning the Air Vents TroubleshootingMaintenanceCleaning the Intake and Exhaust Vents Symptom Possible Causes Solution Troubleshooting TipsSpecifications Serial Interface SpecificationsTransfer Specifications IR Codes and Keynames Remote Button Description RS-232 CommandsIR Codes and Keynames Operation Command Values Function Command Action on unit= RGB = PBP = LED Operations Commands Electrical H9080FD SpecificationsOptics Mechanical Standard AccessoriesShows the H9080FD dimensions, in millimeters H9080FD DimensionsSupported Timings Sdtv Projection Distance and Screen Size Specifications Specifications Specifications

H9080FD specifications

The Vivitek H9080FD is a high-performance home cinema projector designed to deliver an exceptional viewing experience for cinephiles and home theater enthusiasts. This projector stands out with its impressive blend of advanced technologies, stunning image quality, and versatile features, making it a top choice for serious users.

One of the key highlights of the H9080FD is its native resolution of 1080p (1920 x 1080). This ensures that users enjoy sharp, detailed images with vibrant colors, leading to a truly immersive experience. The projector supports high dynamic range (HDR) content, which enhances the depth and realism of the visuals, providing a more lifelike representation of scenes. By leveraging HDR technology, viewers can witness greater contrast, more nuanced shadows, and brilliant highlights.

A standout feature of the Vivitek H9080FD is its advanced DLP (Digital Light Processing) technology, which allows for remarkable color accuracy and overall picture quality. DLP projectors are known for their reliability and longevity, and the H9080FD benefits from a robust design that ensures consistent performance over time.

In terms of brightness, the H9080FD shines bright with an impressive output of 2,500 lumens. This level of brightness ensures that the projector performs well even in environments that are not completely dark, giving users flexibility in installation and usage. Coupled with a high contrast ratio of 50,000:1, the projector delivers deep blacks and brilliant colors, contributing to a more dynamic viewing experience.

The connectivity options on the H9080FD are extensive, featuring HDMI inputs for easy association with modern devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, the projector supports 3D content, allowing audiences to enjoy films and games in an immersive format that pulls them into the action.

In conclusion, the Vivitek H9080FD is a powerful home theater projector that encompasses state-of-the-art technologies and robust features. With its impressive resolution, vibrant colors, high brightness, and extensive connectivity options, this projector is designed to satisfy even the most demanding home cinema aficionados. Whether used for movie nights, gaming, or large presentations, the H9080FD offers an unparalleled viewing experience that truly elevates home entertainment.
Top Page Image Contents