46VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE
changes its colors in response to the new curve. The x and y numbers at the bottom of the response curve indicate the exact position of the pointer on the curve. The Gamma slider remains fixed when you use the Freestyle option.
3.Drag the Gamma, Saturation, and Color Hue sliders to the left to decrease the settings or to the right to increase the settings.
You can also type a number directly into the setting boxes, or click the up and down arrows next to the boxes.
4.Click Reset to return the settings to their original numbers.
The upper Reset button is for the gamma setting, the lower one is for saturation and hue.
5.To save the settings of a response curve, click Save.
Saving is available for settings created with the Freestyle editing option so you can load and reuse the exact settings on other images. This is especially helpful for complex Freestyle response curves.
A dialog box opens that lists the names of previously saved settings. Type a name for your new settings and click OK.
6.To reuse a saved response curve setting, click Load.
A dialog box lists the names of your previously saved settings. Select the one you want and click OK.
ADJUSTING OUTPUT SIZE
The item you’re scanning may not fill the scanner glass. In that case you can preview the item and use the Auto Trim option to automatically eliminate the unwanted sections of the image.
You can also adjust the output size to scan only specific sections of an image. For example, if you’re scanning a photograph and want to focus on one section, adjusting the output size removes the rest of the photograph from the final scanned image.