ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO | 47 |
The following figure shows the output size options:
To Auto Trim an item:
1.Select Auto Trim, and then click the Trim button.
The scanner senses the edges of the item on the glass and draws a dotted line around the image in the window.
Check to make sure the dotted line encloses the image you want.
A new Scan Info box on the lower left portion of the Scan Manager Pro shows the information for the autotrimmed area.
2.If the dotted line is not exactly where you want it, put the pointer on the line and drag the mouse.
For example, if you want the scan to include a border around the image, you can drag the dotted line to be slightly larger than the autotrimmed area.
To use the pointer to drag the line, make sure the pointer button is selected at the top of the window.
3.When the trimmed area is what you want, click Scan.