DLP Projector – User’s Manual
Video/Audio Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings.
ITEM
Video AGC
Video Saturation
Video Tint
Film Mode
Video Overscan
Closed Captioning
Audio
Reset
DESCRIPTION
Press the ◄► buttons to enable or disable the Automatic Gain Control for video source. Press the ◄► buttons to adjust the video saturation.
Press the ◄► buttons to adjust the video tint/hue. Press the ◄► buttons to select a different film mode. Press the ◄► buttons to enable or disable video over scan. Press the ◄► buttons to enable or disable Closed Captioning
Press (Enter) / ► to enter the Audio menu. See Audio on page 27. Press (Enter) / ► to reset all settings to default values.
Note:
Video jagging may occur when playing interlace video. To overcome this issue, open the Video / Audio menu and adjust the Film Mode feature.
– 26 –