Vivitek D7 Lamp Problems, Remote Control Problems, Audio Problems, Having the Projector Serviced

Page 55
Lamp Problems

DLP Projector – User’s Manual

Lamp Problems

Problem: There is no light from the projector

1.Check that the power cable is securely connected.

2.Ensure the power source is good by testing with another electrical device.

3.Restart the projector in the correct order and check that the Power LED is green.

4.If you have replaced the lamp recently, try resetting the lamp connections.

5.Replace the lamp module.

6.Put the old lamp back in the projector and have the projector serviced.

Problem: The lamp goes off

1.Power surges can cause the lamp to turn off. Re-plug power cord. When the Power LED is on, press the power button.

2.Replace the lamp module.

3.Put the old lamp back in the projector and have the projector serviced.

Remote Control Problems

Problem: The projector does not respond to the remote control

1.Direct the remote control towards remote sensor on the projector.

2.Ensure the path between remote and sensor is not obstructed.

3.Turn off any fluorescent lights in the room.

4.Check the battery polarity.

5.Replace the batteries.

6.Turn off other Infrared-enabled devices in the vicinity.

7.Have the remote control serviced.

Audio Problems

Problem: There is no sound

1.Adjust the volume on the remote control.

2.Adjust the volume of the audio source.

3.Check the audio cable connection.

4.Test the source audio output with other speakers.

5.Have the projector serviced.

Problem: The sound is distorted

1.Check the audio cable connection.

2.Test the source audio output with other speakers.

3.Have the projector serviced.

Having the Projector Serviced

If you are unable to solve the problem, you should have the projector serviced. Pack the projector in the original carton. Include a description of the problem and a checklist of the steps you took when trying to fix the problem: The information may be useful to service personnel. For servicing, return the projector to the place you purchased it.

47

Image 55
Contents 사용자 설명서 D7 Series用戶手冊 用户手册Disclaimer CopyrightTrademark Recognition DLP Projector - User’s Manual Important Safety InformationSymbols Used General Safety InformationPreface Projector Installation NoticeReplacing the Lamp Power SafetyCleaning the Projector Symbol ExplanationsAbout this Manual Main FeaturesMAINTENANCE AND SECURITY Table of ContentsSETUP AND OPERATION ON-SCREEN DISPLAY OSD MENU SETTINGSREGULATORY COMPLIANCE SPECIFICATIONSGETTING STARTED Packing ChecklistAvoid using the projector in dusty environments DESCRIPTION Front-right ViewViews of Projector Parts LABELRear view 146.00 Bottom viewWhen installing, ensure that you use only UL Listed ceiling mounts 56.00Remote Control Parts Changes settings in the OSD Projector and Remote Control Buttons Remote Control Operating Range2. Dispose of used batteries according to local ordinance regulations SETUP AND OPERATIONInserting the Remote Control Batteries 1. Only use AAA batteries Alkaline batteries are recommendedA B C D E F G Connecting Input DevicesL K J !Warning Starting and Shutting down the Projector DLP Projector - User’s Manual Security Lock Setting an Access Password Security LockThe service center will validate the owner and help reset the password Adjusting the Projector Level Volume Adjusting the Keystone1. Press the Volume +/- buttons on the remote control Adjusting the VolumeNavigating the OSD ON-SCREEN DISPLAY OSD MENU SETTINGSOSD Menu Controls Set the OSD language to your preference before continuing Setting the OSD Language2. Press the cursor button until Language is highlighted 4. Press the MENU button twice to close the OSDOSD Menu Overview OSD Sub-Menu Overview Image Menu Advanced Feature Press Enter / to enter the Color Manager sub menu Color ManagerComputer Menu Video/Audio Menu Press Enter / to enter the Audio sub menu AudioInstallation I Menu Presentation Timer Installation II Menu DLP Projector - User’s Manual Peripheral Test OSD Menu SettingLamp Hour Reset Network LANRJ45 5. Click Properties 3. Right-click on Local Area Connection, and select Properties8. Select Installation II → Advanced→ Network INPUT -LENGTH CATEGORYStatus Factory ResetReplacing the Projection Lamp MAINTENANCE AND SECURITYb. Do not dispose this product with general household waste Remove the two screws from the lamp module Lift the module handle up Resetting the Lamp 1. Do not use abrasive cleaners or solvents Cleaning the LensCleaning the Case Cleaning the ProjectorUsing the Security Chain Lock Using the Kensington LockUsing the Physical Lock Common problems and solutions TROUBLESHOOTINGTips for Troubleshooting Problem The image is blurred LED Error MessagesImage Problems Problem No image appears on the screenHaving the Projector Serviced Lamp ProblemsRemote Control Problems Audio ProblemsQ. How do I run HDMITM cables longer than 10 meters? HDMITM Q & AQ. How can I tell if a cable is an HDMITM certified cable? Specifications SPECIFICATIONSWXGA Projection Distance and Size TableProjection Distance vs. Projection Size D795WTHDMITM Timing Mode TableH-SYNC V-SYNCO Frequency supported - Frequency not supported 354.00 Projector Dimensions411.00 319.00Canada Safety CertificationsREGULATORY COMPLIANCE FCC Warning201009