Runco CL-500 manual Connector Panel, Computer D-Sub 15-pin RGB Computer signal input

Page 10

Runco

❚Connector Panel

2	1	3			6	7
S-Video					RS-232C	12V
					RS-232C	12V
	Video	Y	CB	CR		Trigger
Computer	G/Y		B/PB	R/PR	H	V
	G/Y		B/PB	R/PR	H	V
5				4

1.Video (RCA Jack) Composite video signal input.

2.S-Video (mini DIN 4-pin) Y/C (S-video) signal input

3.Component (RCA Jacks)

480i Component (Y/CB/CR) video signal input

4.RGB/ HDTV (BNC)

DTV Y/PB/PR or DTV RGB video signal input.

5.Computer (D-Sub 15-pin) RGB Computer signal input.

6.RS-232C (RJ-11 Jack) RS-232C control signal input.

7.12v Trigger (mini jack)

+12V output, active when the projector is turned on.

61. Overview

Image 10

Contents CL-500 Page Limited Warranty Effective Warranty Date Runco CL-500 Video Projector User’s Manual Page Features OverviewFront / Upper Side LocationRear / Bottom Side Zoom Ring Controls and FunctionsControl Panel Focus RingComputer D-Sub 15-pin RGB Computer signal input Connector Panel12v Trigger mini jack Anamorphic For Remote ControlComponent HD DTV Y/ PB/PR signal input PIP Picture in PictureConnect the Power Cord InstallationRemote Control ProjectorAdjust the Lens Zoom/Focus ring Adjust the heightFor 16 x 9 Screens For 4 x 3 ScreensThrowDistanc61.00 eChart109.00 Connecting Video Inputs ConnectingVideo/ S-Video/ Component Interlaced Video Progressive Component DTV Y/PB/PR Rgbhv DTV RGBConnecting a Computer Basic Operation Turning on the PowerZoom/ Focusing Selecting Input SourceSelecting Aspect ratio Setting MenuSelecting Video Memory Turning off the Power PIP functionPicture Setting Using the MenuMenu Display Setting Screens Environment Setting Install SettingAdditional Information Replace the Lamp Contact your Runco DealerTroubleshooting Problem Cause RemedySpecifications Dimensions PC Out Adapter Code FunctionPage RUMA-009550 rev