Sharp PG-D4010X specifications Password Setting, Projector Name Setting, RS-232C Baud Rate Setting

Sharp PG-D4010X specifications Setting an IP Address for the Computer Sharp PG-D4010X specifications Set temporarily as follows Sharp PG-D4010X specifications Setting up a Network Con- nection for the Projector Sharp PG-D4010X specifications Dns Sharp PG-D4010X Controlling the Projector via LAN, Controlling the Projector Using Internet Explorer, Version 5.0 or later Sharp PG-D4010X specifications Confirming the Projector, Controlling the Projector, Status Status Sharp PG-D4010X Setting and Adjusting, Setting the Security, Projector Settings & Adjustments, Network Security Sharp PG-D4010X Making General Settings for, Setting for Sending E-mail when an Error Occurs, Network Network General Sharp PG-D4010X specifications Mail Recipient Settings, Access URL Sharp PG-D4010X specifications Setting up the Projector Using RS-232C or Telnet, When Connecting Using RS-232C Sharp PG-D4010X specifications When Connecting Using Telnet Sharp PG-D4010X specifications Setup Menu Main Menu, Advanced Setup Menu Sharp PG-D4010X specifications View Setting Detail List, Set Items, VView All Setting Sharp PG-D4010X specifications Save Settings and Quit, Quit without Saving Set, SSave & Quit, Tings QQuit Unchanged Sharp PG-D4010X specifications IP Address Setting, Default Gateway Setting, Subnet Mask Setting, User Name Setting Sharp PG-D4010X specifications Password Setting, Projector Name Setting, RS-232C Baud Rate Setting, Dhcp Client Setting Sharp PG-D4010X specifications Disconnecting All Connec, Setting Auto Logout Time, Entering Advanced, Data Port Setting Sharp PG-D4010X specifications Carrying out Network Ping Test, Setting of Accept IP Ad- dress, Accepting All IP Addresses Sharp PG-D4010X specifications Setting of Search Port, Return to Main Menu, Return to Default Settings Sharp PG-D4010X specifications Resetting the Lamp Timer of the Projector via LAN, Select TCP/IP Winsock Sharp PG-D4010X specifications Resetting the Lamp Timer of the Projector via LAN Sharp PG-D4010X specifications Troubleshooting, Communication cannot be established with the projector Sharp PG-D4010X specifications Troubleshooting Sharp PG-D4010X specifications After the initialization, carry out setting again
Page 26

Setting up the Projector Using RS-232C or Telnet

Password Setting

([5]Password)

Carrying out security protection using password.

setup>5

 

 

1

Password

:

 

2

Please Enter

: sharppj

(change)

—> sharppj

 

 

 

 

*

 

 

 

1 Enter “5” and press the “Enter” key.

2 Enter password and press the “Enter” key. Display set password (*).

Projector Name Setting

([7]Projector Name)

It is possible to assign a projector name.

setup>7

 

 

1

Projector Name

: XX-XXXX

2

Please Enter

: MY XX-XXXX

(change) —>

MY XX-XXXX

 

 

*

 

 

1 Enter “7” and press the “Enter” key.

2 Enter projector name. Display set projector name (*).

Note

•Password can be up to 8 characters.

•You can input the characters below: a-z, A-Z, 0-9, -, _

•In the default state, the password is not set.

Note

•Projector name can be up to 12 characters.

•You can input the characters below: A-Z, 0-9, -, _, (,), space

(When “a-z” are input, they are converted to “A-Z” automatically.)

•It is the same as the name which can be confi rmed or set, using RS-232C commands “PJN0”, “PJN1”, “PJN2” and “PJN3”.

RS-232C Baud Rate Setting

([6]RS-232C Baud Rate)

Setting of baud rate for RS-232C terminals.

setup>6

1

0 ... 9600 bps

1 ... 38400 bps

2 ... 115200 bps

Baud Rate Select[0-2] :22

RS-232C Baud Rate : 115200 bps *

1 Enter “6” and press the “Enter” key.

2 Select and enter the number 0, 1 or 2 and press the “Enter” key.

Display set baud rate (*).

Note

•Set the projector's baud rate to the same rate as that used by the computer.

DHCP Client Setting

([8]DHCP Client)

Setting DHCP Client to “Enable” or “Disable”.

Example: When setting DHCP Client to “Enable”

setup>8

 

 

1

note: It sets DHCP Client.

 

 

0 ... Disable

 

 

 

 

1 ... Enable

 

 

2

DHCP Select[0-1] : 1

DHCP Client : Enable

 

 

Success get data from DHCP server.

 

 

[MAC Address

] : [XX:XX:XX:XX:XX:XX]

 

 

[IP Address

] : [192.168.150.2]

 

 

*

[Subnet Mask

] : [255.255.255.0]

 

 

[Default Gateway

] : [0.0.0.0]

 

 

 

[DHCP IP Address] : [192.168.150.1]

 

 

 

 

 

 

1 Enter “8” and press the “Enter” key.

 

 

2 Enter “1” and press the “Enter” key.

 

 

Display the obtained values (*).

 

 

-26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Setup Manual Connecting Pin Assignments Sub 15 pin female connectorRS-232C Terminal D-sub 9 pin male connector USB Terminal Type B USB connectorBasic format RS-232C Specifications and CommandsComputer control Communication conditions Commands ← O KDNR Video Input Picture Mode Standard OK or ERR PAL Setting up the Projector Network Environment Network settings on the computerConnecting the Projector to a Computer Setting an IP Address for the Computer Set temporarily as follows Setting up a Network Con- nection for the Projector DNS Version 5.0 or later Controlling the Projector Using Internet ExplorerControlling the Projector via LAN Status Status Confirming the ProjectorControlling the Projector ControlProjector Settings & Adjustments Setting and AdjustingSetting the Security Network SecurityMail Originator Settings Making General Settings forSetting for Sending E-mail when an Error Occurs Network Network GeneralMail Recipient Settings Access URLSetting up the Projector Using RS-232C or Telnet When Connecting Using RS-232CWhen Connecting Using Telnet Setup Menu Main Menu Advanced Setup MenuSet Items View Setting Detail ListVView All Setting SSave & Quit Save Settings and QuitQuit without Saving Set Tings QQuit UnchangedSubnet Mask Setting IP Address SettingDefault Gateway Setting User Name SettingRS-232C Baud Rate Setting Password SettingProjector Name Setting Dhcp Client SettingData Port Setting Disconnecting All ConnecSetting Auto Logout Time Entering AdvancedAccepting All IP Addresses Setting of Accept IP Ad- dressCarrying out Network Ping Test Return to Main Menu Setting of Search PortReturn to Default Settings Resetting the Lamp Timer of the Projector via LAN Select TCP/IP WinsockResetting the Lamp Timer of the Projector via LAN Troubleshooting Communication cannot be established with the projectorTroubleshooting \ After the initialization, carry out setting again
Related manuals
Manual 1 pages 42.92 Kb Manual 69 pages 21.69 Kb

PG-D4010X specifications

The Sharp PG-D4010X is a highly versatile and advanced projector designed to cater to the needs of educational institutions, corporate environments, and professional presentations. This projector is well-regarded for its impressive performance, providing a rich visual experience and a plethora of features that enhance its usability in various settings.

One of the standout features of the PG-D4010X is its brightness. With a remarkable output of up to 4,000 ANSI lumens, this projector ensures clear and vibrant images even in well-lit environments. This level of brightness is particularly beneficial in classrooms and conference rooms where ambient light can be challenging. Additionally, the resolution of 1024 x 768 (XGA) guarantees sharp and detailed presentations, making it ideal for displaying graphs, charts, and videos.

In terms of technology, the PG-D4010X utilizes a 3LCD projection system, which offers a broad color spectrum and reduces the risk of color distortion. This results in bright, colorful images that are true to life. The advanced color processing capabilities of the projector ensure that both text and images are displayed with excellent clarity, making it suitable for a wide range of content from educational materials to business presentations.

The projector also incorporates a variety of connectivity options, ensuring compatibility with a range of devices. The PG-D4010X features HDMI, VGA, and USB ports, allowing users to connect laptops, tablets, and other media devices seamlessly. The inclusion of a built-in speaker amplifies the audio experience, providing an all-in-one solution for presentations without the need for additional audio equipment.

Another notable characteristic of this projector is its lamp life. The long-lasting lamp provides approximately 5,000 hours of operation in standard mode, which reduces the frequency of bulb replacements and lowers long-term maintenance costs. Furthermore, the projector has a convenient eco-mode that extends lamp life even further while conserving energy, making it environmentally friendly.

Overall, the Sharp PG-D4010X is a reliable and feature-rich projector that excels in performance and versatility. Its high brightness, excellent color reproduction, multiple connectivity options, and extended lamp life make it an ideal choice for educators, business professionals, and anyone seeking a dependable projection solution. Whether used for lectures, meetings, or multimedia presentations, the PG-D4010X delivers impressive results that meet the demands of today's dynamic environments.
Top Page Image Contents