Sharp PG-D4010X RS-232C Specifications and Commands, Computer control Communication conditions

Page 4

RS-232C Specifications and Commands

Computer control

A computer can be used to control the projector by connecting an RS-232C serial control cable (cross type, commercially available) to the projector. (See page 24 of the projector's operation manual for connection.)

Communication conditions

Set the serial port settings of the computer to match that of the table.

Signal format: Conforms to RS-232C standard.

Parity bit: None

Baud rate*: 9,600 bps / 38,400 bps / 115,200 bps

Stop bit: 1 bit

Data length: 8 bits

Flow control: None

*Set the projector's baud rate to the same rate as used by the computer.

Basic format

Commands from the computer are sent in the following order: command, parameter, and return code. After the projector processes the command from the computer, it sends a response code to the computer.

Command format

C1 C2 C3 C4 P1 P2 P3 P4

Return code (0DH)

 

Command 4-digit

Parameter 4-digit

 

 

 

 

 

Response code format

 

 

 

 

 

 

 

 

 

Normal response

 

 

Problem response (communication error or incorrect command)

 

O

K

 

Return code (0DH)

 

E

R

R

 

Return code (0DH)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Info

•When controlling the projector using RS-232C commands from a computer, wait for at least 30 seconds after the power has been turned on, and then transmit the commands.

•After sending an input selection or picture adjustment command and then receiving an “OK” response code, the projector may take some time to process the command. If a second command is sent while the projector is still processing the fi rst command, you may receive an “ERR” response code. If this happens, try resending the second command.

•When more than one code is being sent, send each command only after the response code for the previous command from the projector is verifi ed.

•“POWR????”, “TABN _ _ _ 1”, “TLPS _ _ _ 1”, “TPOW _ _ _ 1”, “TLPN _ _ _ 1”, “TLTT _ _ _ 1”, “TLTM _ _ _ 1”, “TLTL _ _ _ 1”, “TNAM _ _ _ 1”, “MNRD _ _ _ 1”, “PJN0 _ _ _ 1”

−When the projector receives the special commands shown above:

*The on-screen display will not disappear.

*The “Auto Power Off” timer will not be reset.

−The special commands are available for applications that require continuous polling.

Note

•If an underbar (_) appears in the parameter column, enter a space.

•If an asterisk (*) appears in the parameter column, enter a value in the range indicated in brackets under Control Contents.

PJLinkTM Compliant:

This product conforms with the PJLink standard Class 1 and all Class 1 commands are implemented. This product confi rms with the PJLink standard specifi cation version 1.00.

For additional information, visit “http://pjlink.jbmia.or.jp/english/”.

-4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Setup Manual Connecting Pin Assignments Sub 15 pin female connectorRS-232C Terminal D-sub 9 pin male connector USB Terminal Type B USB connectorComputer control Communication conditions RS-232C Specifications and CommandsBasic format Commands ← O KDNR Video Input Picture Mode Standard OK or ERR PAL Setting up the Projector Network Environment Network settings on the computerConnecting the Projector to a Computer Setting an IP Address for the Computer Set temporarily as follows Setting up a Network Con- nection for the Projector DNS Controlling the Projector via LAN Controlling the Projector Using Internet ExplorerVersion 5.0 or later Confirming the Projector Controlling the ProjectorStatus Status ControlSetting and Adjusting Setting the SecurityProjector Settings & Adjustments Network SecurityMaking General Settings for Setting for Sending E-mail when an Error OccursMail Originator Settings Network Network GeneralMail Recipient Settings Access URLSetting up the Projector Using RS-232C or Telnet When Connecting Using RS-232CWhen Connecting Using Telnet Setup Menu Main Menu Advanced Setup MenuVView All Setting View Setting Detail ListSet Items Save Settings and Quit Quit without Saving SetSSave & Quit Tings QQuit UnchangedIP Address Setting Default Gateway SettingSubnet Mask Setting User Name SettingPassword Setting Projector Name SettingRS-232C Baud Rate Setting Dhcp Client SettingDisconnecting All Connec Setting Auto Logout TimeData Port Setting Entering AdvancedCarrying out Network Ping Test Setting of Accept IP Ad- dressAccepting All IP Addresses Return to Default Settings Setting of Search PortReturn to Main Menu Resetting the Lamp Timer of the Projector via LAN Select TCP/IP WinsockResetting the Lamp Timer of the Projector via LAN Troubleshooting Communication cannot be established with the projectorTroubleshooting \ After the initialization, carry out setting again
Related manuals
Manual 1 pages 42.92 Kb Manual 69 pages 21.69 Kb

PG-D4010X specifications

The Sharp PG-D4010X is a highly versatile and advanced projector designed to cater to the needs of educational institutions, corporate environments, and professional presentations. This projector is well-regarded for its impressive performance, providing a rich visual experience and a plethora of features that enhance its usability in various settings.

One of the standout features of the PG-D4010X is its brightness. With a remarkable output of up to 4,000 ANSI lumens, this projector ensures clear and vibrant images even in well-lit environments. This level of brightness is particularly beneficial in classrooms and conference rooms where ambient light can be challenging. Additionally, the resolution of 1024 x 768 (XGA) guarantees sharp and detailed presentations, making it ideal for displaying graphs, charts, and videos.

In terms of technology, the PG-D4010X utilizes a 3LCD projection system, which offers a broad color spectrum and reduces the risk of color distortion. This results in bright, colorful images that are true to life. The advanced color processing capabilities of the projector ensure that both text and images are displayed with excellent clarity, making it suitable for a wide range of content from educational materials to business presentations.

The projector also incorporates a variety of connectivity options, ensuring compatibility with a range of devices. The PG-D4010X features HDMI, VGA, and USB ports, allowing users to connect laptops, tablets, and other media devices seamlessly. The inclusion of a built-in speaker amplifies the audio experience, providing an all-in-one solution for presentations without the need for additional audio equipment.

Another notable characteristic of this projector is its lamp life. The long-lasting lamp provides approximately 5,000 hours of operation in standard mode, which reduces the frequency of bulb replacements and lowers long-term maintenance costs. Furthermore, the projector has a convenient eco-mode that extends lamp life even further while conserving energy, making it environmentally friendly.

Overall, the Sharp PG-D4010X is a reliable and feature-rich projector that excels in performance and versatility. Its high brightness, excellent color reproduction, multiple connectivity options, and extended lamp life make it an ideal choice for educators, business professionals, and anyone seeking a dependable projection solution. Whether used for lectures, meetings, or multimedia presentations, the PG-D4010X delivers impressive results that meet the demands of today's dynamic environments.
Top Page Image Contents