Sharp PG-D4010X Disconnecting All Connec, Setting Auto Logout Time, Entering Advanced

Page 27

Setting up the Projector Using RS-232C or Telnet

Disconnecting All Connec-

tions ([D]Disconnect All)

Setting Auto Logout Time

(ADVANCED[1]Auto Logout Time)

It is possible to disconnect all the TCP/IP connections currently recognized by the projector. Even if the COM Redirect port is fixed in the Busy status due to a problem, it is possible to force the Ready status back by carrying out this disconnection.

setup>d

1

Disconnect All Connections(y/n)?y

2

Now Disconnecting...

 

 

 

1 Enter “d” and press the “Enter” key.

2 Enter “y” and press the “Enter” key.

Note

•If Disconnect All is performed, the connection to the projector via network will be forcibly disconnected.

Entering ADVANCED

SETUP MENU

([A]Advanced Setup)

Enters ADVANCED SETUP MENU.

setup>a

1

********************** ADVANCED SETUP MENU *************************

[1]Auto Logout Time

[2]Data Port

[5]Network Ping Test

 

[6]Accept IP Addr(1)

[7]Accept IP Addr(2) [8]Accept IP Addr(3)

[9]Accept All IP Addr

[0]Search Port

[!]Restore Default Setting [Q]Return to Main Menu

advanced>

1 Enter “a” and press the “Enter” key.

If there is no input after a fixed time, the projector automatically disconnects network connection using the Auto Logout function. It is possible to set the time until the projector is automatically disconnected in units of a minute (from 1 to 65535 minutes).

advanced>1

 

 

1

Valid range

: 0 to 65535 (minute)

 

 

note: if you enter “0”, auto logout function will be disable.

 

 

Auto Logout Time: 5

2

Please Enter

:15

 

(change)

—> 15

 

 

 

 

*

 

 

 

1 Enter “1” and press the “Enter” key.

2 Enter numerical value and press the “Enter” key.

Display set numerical value (*).

Note

•If the set value is made 0, the Auto Logout function is disabled.

•If an invalid number is entered, an error message (“Parameter Error!”) will be displayed and the screen returns to the ADVANCED SETUP MENU.

Data Port Setting

(ADVANCED[2]Data Port)

Setting of TCP port number. It is possible to set in the range of 1025 to 65535.

advanced>2

 

 

1

Valid range

:1025 to 65535

 

 

Data Port

:10002

 

2

Please Enter

:10005

 

(change)

—> 10005

 

 

*

 

 

1 Enter “2” and press the “Enter” key.

2 Enter numerical value and press the “Enter” key.

Display set numerical value (*).

Note

•Set according to need. Normally, use with the factory default setting.

-27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Setup Manual Sub 15 pin female connector Connecting Pin AssignmentsUSB Terminal Type B USB connector RS-232C Terminal D-sub 9 pin male connectorRS-232C Specifications and Commands Computer control Communication conditionsBasic format ← O K CommandsDNR Video Input Picture Mode Standard OK or ERR PAL Network settings on the computer Setting up the Projector Network EnvironmentConnecting the Projector to a Computer Setting an IP Address for the Computer Set temporarily as follows Setting up a Network Con- nection for the Projector DNS Controlling the Projector Using Internet Explorer Controlling the Projector via LANVersion 5.0 or later Control Confirming the ProjectorControlling the Projector Status StatusNetwork Security Setting and AdjustingSetting the Security Projector Settings & AdjustmentsNetwork Network General Making General Settings forSetting for Sending E-mail when an Error Occurs Mail Originator SettingsAccess URL Mail Recipient SettingsWhen Connecting Using RS-232C Setting up the Projector Using RS-232C or TelnetWhen Connecting Using Telnet Advanced Setup Menu Setup Menu Main MenuView Setting Detail List VView All SettingSet Items Tings QQuit Unchanged Save Settings and QuitQuit without Saving Set SSave & QuitUser Name Setting IP Address SettingDefault Gateway Setting Subnet Mask SettingDhcp Client Setting Password SettingProjector Name Setting RS-232C Baud Rate SettingEntering Advanced Disconnecting All ConnecSetting Auto Logout Time Data Port SettingSetting of Accept IP Ad- dress Carrying out Network Ping TestAccepting All IP Addresses Setting of Search Port Return to Default SettingsReturn to Main Menu Select TCP/IP Winsock Resetting the Lamp Timer of the Projector via LANResetting the Lamp Timer of the Projector via LAN Communication cannot be established with the projector TroubleshootingTroubleshooting \ After the initialization, carry out setting again
Related manuals
Manual 1 pages 42.92 Kb Manual 69 pages 21.69 Kb

PG-D4010X specifications

The Sharp PG-D4010X is a highly versatile and advanced projector designed to cater to the needs of educational institutions, corporate environments, and professional presentations. This projector is well-regarded for its impressive performance, providing a rich visual experience and a plethora of features that enhance its usability in various settings.

One of the standout features of the PG-D4010X is its brightness. With a remarkable output of up to 4,000 ANSI lumens, this projector ensures clear and vibrant images even in well-lit environments. This level of brightness is particularly beneficial in classrooms and conference rooms where ambient light can be challenging. Additionally, the resolution of 1024 x 768 (XGA) guarantees sharp and detailed presentations, making it ideal for displaying graphs, charts, and videos.

In terms of technology, the PG-D4010X utilizes a 3LCD projection system, which offers a broad color spectrum and reduces the risk of color distortion. This results in bright, colorful images that are true to life. The advanced color processing capabilities of the projector ensure that both text and images are displayed with excellent clarity, making it suitable for a wide range of content from educational materials to business presentations.

The projector also incorporates a variety of connectivity options, ensuring compatibility with a range of devices. The PG-D4010X features HDMI, VGA, and USB ports, allowing users to connect laptops, tablets, and other media devices seamlessly. The inclusion of a built-in speaker amplifies the audio experience, providing an all-in-one solution for presentations without the need for additional audio equipment.

Another notable characteristic of this projector is its lamp life. The long-lasting lamp provides approximately 5,000 hours of operation in standard mode, which reduces the frequency of bulb replacements and lowers long-term maintenance costs. Furthermore, the projector has a convenient eco-mode that extends lamp life even further while conserving energy, making it environmentally friendly.

Overall, the Sharp PG-D4010X is a reliable and feature-rich projector that excels in performance and versatility. Its high brightness, excellent color reproduction, multiple connectivity options, and extended lamp life make it an ideal choice for educators, business professionals, and anyone seeking a dependable projection solution. Whether used for lectures, meetings, or multimedia presentations, the PG-D4010X delivers impressive results that meet the demands of today's dynamic environments.
Top Page Image Contents