Sharp PG-D3550W, PG-D2870W, PG-D3050W specifications Controlling the Projector via LAN

Page 17

Controlling the Projector via LAN

After connecting the projector to your network, enter the projector IP address in “Address” on Internet Explorer (version 6.0 or later) using a computer on the network to start a setup screen that will enable control of the projector via the network.

Controlling the Projector

Using Internet Explorer

Complete connections to external equipment before starting the operation. (See pages 21-25 of the projector's operation manual.)

Complete the AC cord connection. (See page 25 of the projector's operation manual.)

Note

•When connecting the projector to the LAN, use a commercially available LAN cable (UTP cable, Category 5, cross-over type). When connecting the projector to a hub, use a straight-through cable.

1

2

Start Internet Explorer on the computer.

Enter “http://” followed by the projector IP address set by the procedure on page 16 followed by “/” in “Address”, and then press the “Enter” key.

•When “DHCP Client” is set to “OFF” on the projector, IP address is 192.168.150.2. If you did not change the IP address in “3. Setting up a Network Connection for the Projector” (pages 15-16), enter “http://192.168.150.2/”.

3A screen for controlling the projector appears, ready for performing various status conditions, control, and settings.

-17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Setup Manual Sub 15 pin female connector Connecting Pin AssignmentsConnecting Pin Assignments Basic format RS-232C Specifications and CommandsComputer control Communication conditions W R CommandsReturn Dynamic Auto OK or ERR PAL Control Contents Command Sharp Operating the Projector Using the PJLinkTM ProtocolNetwork settings on the computer Setting up the Projector Network EnvironmentConnecting the Projector to a Computer Setting an IP Address for the Computer Set temporarily as follows Setting up a Network Con- nection for the Projector Dhcp Controlling the Projector via LAN Controlling the Projector Using Internet ExplorerControlling the Projector Confirming the ProjectorSetting the Security Setting and AdjustingSetting for Sending E-mail when an Error Occurs Making General Settings forMail Recipient Settings Resetting the Lamp Timer of the Projector via LAN Resetting the Lamp Timer of the Projector via LAN Communication cannot be established with the projector TroubleshootingTroubleshooting ? After the initialization, carry out setting again
Related manuals
Manual 75 pages 24.08 Kb

PG-D3550W, PG-D3050W, PG-D2870W specifications

The Sharp PG-D3550W, PG-D2870W, and PG-D3050W are advanced projectors designed to meet the demands of a variety of presentation and viewing environments. Each model is tailored to provide high-quality visual performance while incorporating innovative technology and user-friendly features.

The Sharp PG-D3550W is known for its impressive brightness of 3500 lumens, making it suitable for well-lit rooms. It supports a native resolution of 1280 x 800 pixels, delivering sharp and clear images that are ideal for professional presentations and educational settings. One of the standout features of this model is its extensive connectivity options, including HDMI, VGA, and USB inputs, allowing users to easily connect a wide range of devices. Additionally, the projector includes a 1.2x optical zoom lens, enabling flexible placement in various environments. The built-in speaker system further enhances presentations without the need for external audio equipment.

The PG-D2870W model shines with its optimized brightness of 2800 lumens, making it a robust choice for smaller conference rooms and classrooms. With a native resolution of 1280 x 800, this projector also guarantees high-quality images. It incorporates Sharp’s advanced color technology, which ensures vivid and accurate color reproduction. The PG-D2870W also features a user-friendly interface, allowing presenters to easily navigate settings and inputs. Its lightweight design and easy portability make it convenient for onsite presentations.

Lastly, the Sharp PG-D3050W is marked by its versatility and solid performance. With a brightness of 3000 lumens and a native resolution of 1280 x 800, it provides balanced performance across different lighting conditions. Users will appreciate its Quick Start feature, which allows for rapid power-up, reducing downtime before presentations. The projector comes equipped with dynamic contrast technology, enhancing image quality and depth. Its eco-friendly mode helps reduce energy consumption, making it a sustainable choice.

In summary, the Sharp PG-D3550W, PG-D2870W, and PG-D3050W projectors cater to a variety of professional and academic needs. Each model combines high brightness, versatile connectivity, and enhanced image quality, ensuring reliable performance and impressive visuals for any occasion. They exemplify Sharp's commitment to innovation and quality, making them essential tools for effective communication and engaging presentations.
Top Page Image Contents