Sharp PG-D2870W, PG-D3050W, PG-D3550W specifications Mail Recipient Settings

(Service & Support –

Setting Error Items and Destination Addresses to which E-mail is to be Sent when an Error Occurs

(Mail – Recipient Settings)

Controlling the Projector via LAN

Setting Error Items and the URL that are to be Displayed when an Error Occurs

Access URL)

On this screen, you can input e-mail destinations to which error notification (error items) e-mails are sent.

Items	Description
E-mail	Set addresses to which error
Address	notification e-mail is sent. You can set
	up to five addresses.
Error Mail	Error e-mail is sent on the error items
(Lamp, Temp,	checked in their check boxes.
Fan,Cover)
Test	Send test e-mail. This allows you to
	confirm that the settings for e-mail
	transmission are properly set.

Note

•E-mail Address can be up to 64 characters.

•You can input the characters below:

a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, , }, ~, _, ', ., @, `

(You can input “@” only one time.)

•For details about error items, refer to the projector's operation manual.

On this screen, you can make settings of the URL and error items that are to be displayed when the projector has generated an error.

Items	Description
Access URL	Set the URL that is to be displayed
	when an error occurs. You can set up
	to five addresses.
Condition	The URL is displayed when an error
(Always,	checked in their check boxes occurs.
Lamp, Temp,
Fan,Cover)
Test	The set URL site is test-displayed. This
	allows you to confirm that the URL site
	is properly displayed.

Example of the display when an error occurs

-21