Sharp PG-D4010X Rest your eyes occasionally, Avoid locations with extremes of temperature

Page 12

Observe the following safeguards when setting up your projector.

Caution concerning the lamp unit

■ Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement.

See “Regarding the Lamp” on page 55.

Caution concerning the setup of the projector

■For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the vents and lens must be cleaned more often. As long as the projector is regularly cleaned, use in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center.

When using the projector in high- altitude areas such as mountains (at altitudes of approximately 1,500 meters (4,900 feet) or more)

■When you use the projector in high-altitude areas with thin air, set “Fan Mode” to “High”. Neglecting this can affect the longevity of the optical system.

Warning about placing the projector in a high position

■When placing the projector in a high position, make certain it is carefully secure to avoid personal injury caused by the projector falling down.

Do not subject the projector to hard impact and/or vibration.

■Protect the lens so as not to hit or damage the surface of the lens.

Rest your eyes occasionally.

■Continuously watching the screen for long hours will cause eye strain. Take regular breaks to rest your eyes.

Do not set up the projector in places exposed to direct sunlight or bright light.

■Position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

Caution regarding placing of the projector

■Place the projector on a level site within the adjustment range (9 degrees) of the adjustment foot.

■After the projector is purchased, a faint smell from the vent may appear when the power is first turned on. This is normal and is not a malfunction. It will disappear after the projector is used for a while.

Avoid locations with extremes of temperature.

■The operating temperature of the projector is from 41°F to 95°F (+5°C to +35°C).

■The storage temperature of the projector is from –4°F to 140°F (–20°C to +60°C).

Do not block the exhaust and intake vents.

■Allow at least 11 13/16 inches (30 cm) of space between the exhaust vent and the nearest wall or obstruction.

■Ensure that the intake vent and the exhaust vent are not obstructed.

■If the cooling fan becomes obstructed, a protection circuit will automatically put the projector into standby mode to prevent overheat damage. This does not indicate a malfunction. (See pages 53 and 54.) Remove the projector power cord from the wall outlet and wait at least 10 minutes. Place the projector where the intake and exhaust vents are not blocked, plug the power cord back in and turn on the projector. This will return the projector to the normal operating condition.

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Setup PG-D4010XModel No Serial No This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianPage IntroductionENGLISH Void the users authority to operate this equipmentA. only OnlyMaintenance Troubleshooting Index Using the Menu ScreenFor Future Reference Contents Setting up the Projector Network Environment Network Menu ReferenceCleaning Power SourcesAccessories Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Closed Caption uses Bitstream Vera fontsWhen you want to view the Setup Manual Setup ManualFor Windows For MacintoshAccessories Optional accessoriesPart Names and Functions ProjectorTop View Front ViewUsing the Carrying Handle Using the Kensington LockRear View TerminalsCOMPUTER, DVI UP/PAGECLICK/EFFECT CLICK/RETURNRemote control signal transmitters Inserting the BatteriesUsable Range Setup and Projection Quick StartAdjust the projected image Setting up the Projector Setting up the ProjectorStandard Setup Front Projection Ceiling-mount SetupProjection PRJ Mode Example 43 Signal Input Normal Mode Picture Size120 Projection DistanceSignal Input Normal Mode Signal Input Stretch ModeScreen Size and Projection Distance Connecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer Connecting the Power Cord When connecting to the LAN terminal using a LAN cableAC socket Power cord SuppliedTurning the Projector On/Off Turning the Projector OnAdjusting the Projected Image Adjusting the Focus Adjusting the HeightAdjusting the Picture Size Image ProjectionPress Keystone to enter the Keystone Correction mode Press P/Q or O/R to adjust Keystone CorrectionCorrecting Trapezoidal Distortion Press KeystoneSwitching the Input Mode Adjusting the VolumeVIDEO, Video buttons AV Mute button VOL +/- Volume buttons On-screen displayResize Mode Press ResizeResize About Copyrights Operating with the Remote Control Displaying and Setting the Break TimerUsing the Spot Function Switching the Eco+Quiet ModeAuto Sync Auto Sync Adjustment Selecting the Picture ModeFreezing a Moving Image Displaying an Enlarged Portion of an ImageUsing the Remote Control as the Wireless Computer Mouse When moving the cursorWhen left-clicking When right-clickingMenu Items Picture menuScreen adjustment SCR-ADJ menu Projector adjustment PRJ-ADJ menuNetwork menu Help menuItems you can set with the Help menu Help menu nUsing the Menu Screen Menu Selections AdjustmentsPress Q or O and select Picture to adjust Press MENU/HELPTo adjust the projected image while watching it Press P or R and select Bright to adjustPress O or Q to adjust the item selected Press EnterPicture Adjustment Picture Menu Selecting the Picture ModePAGE1 Menu operation nAdjusting the Image Adjusting the Color TemperatureAdjusting the Colors Adjusting Hue, Saturation, or ValueProgressive Reducing Image Noise DNREco+Quiet Adjusting the Projected Image SCR ADJ Menu Setting the Resize Mode2Adjusting the Image Position Setting the OverscanSetting the On-screen Display Closed CaptionSelecting the Background Image Reversing/Inverting Projected ImagesAuto Sync Auto Sync Adjustment Auto Power Off FunctionStandby Mode Auto Restart FunctionAudio Output Type Setting Speaker SettingFan Mode Setting Selecting the Transmission Speed RS-232CWhen the System Lock is set Checking the Lamp Life StatusEnter the same keycode in Re Confirm Input screen for keycodeKeylock Function Locking the Operation ButtonsTaking the Keylock off Setting a Password Select Password, then press Enter or QEnter the same password in Reconfirm, then press Enter On the projector, pressSetting up the Projector Network Environment Network Menu Dhcp Client SettingTCP/IP Setting Enter IP Address using P, R, Q and O, then press EnterTroubleshooting with the Help Menu Example When image flickering appearsEnter button Adjustment buttons P/R/O/Q MENU/HELP button Utilizing the Help Menu FunctionsMaintenance Cleaning the projectorCleaning the lens Cleaning the exhaust and intake ventsMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp A onlyRemoving and Installing the Lamp Unit Remove the lamp unit coverLamp unit AN-D400LPResetting the Lamp Timer Computer Compatibility Chart ComputerTroubleshooting 21-2552, 53 Sharp Electronics Corporation Specifications Dimensions Kensington Security Standard connector ·················13 Index
Related manuals
Manual 34 pages 37.76 Kb Manual 1 pages 42.92 Kb

PG-D4010X specifications

The Sharp PG-D4010X is a highly versatile and advanced projector designed to cater to the needs of educational institutions, corporate environments, and professional presentations. This projector is well-regarded for its impressive performance, providing a rich visual experience and a plethora of features that enhance its usability in various settings.

One of the standout features of the PG-D4010X is its brightness. With a remarkable output of up to 4,000 ANSI lumens, this projector ensures clear and vibrant images even in well-lit environments. This level of brightness is particularly beneficial in classrooms and conference rooms where ambient light can be challenging. Additionally, the resolution of 1024 x 768 (XGA) guarantees sharp and detailed presentations, making it ideal for displaying graphs, charts, and videos.

In terms of technology, the PG-D4010X utilizes a 3LCD projection system, which offers a broad color spectrum and reduces the risk of color distortion. This results in bright, colorful images that are true to life. The advanced color processing capabilities of the projector ensure that both text and images are displayed with excellent clarity, making it suitable for a wide range of content from educational materials to business presentations.

The projector also incorporates a variety of connectivity options, ensuring compatibility with a range of devices. The PG-D4010X features HDMI, VGA, and USB ports, allowing users to connect laptops, tablets, and other media devices seamlessly. The inclusion of a built-in speaker amplifies the audio experience, providing an all-in-one solution for presentations without the need for additional audio equipment.

Another notable characteristic of this projector is its lamp life. The long-lasting lamp provides approximately 5,000 hours of operation in standard mode, which reduces the frequency of bulb replacements and lowers long-term maintenance costs. Furthermore, the projector has a convenient eco-mode that extends lamp life even further while conserving energy, making it environmentally friendly.

Overall, the Sharp PG-D4010X is a reliable and feature-rich projector that excels in performance and versatility. Its high brightness, excellent color reproduction, multiple connectivity options, and extended lamp life make it an ideal choice for educators, business professionals, and anyone seeking a dependable projection solution. Whether used for lectures, meetings, or multimedia presentations, the PG-D4010X delivers impressive results that meet the demands of today's dynamic environments.
Top Page Image Contents