Sharp PG-D4010X quick start This Apparatus Must be Earthed

Page 3

SPECIAL NOTE FOR USERS IN THE U.K.

The mains lead of this product is fi tted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used.

Always refi t the fuse cover after replacing the fuse. Never use the plug without the fuse cover fi tted.

In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fi t an appropriate type.

DANGER:

The fuse from the cut-off plug should be removed and the cut-off plug destroyed immedi- ately and disposed of in a safe manner.

Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur.

To fi t an appropriate plug to the mains lead, follow the instructions below:

WARNING:

THIS APPARATUS MUST BE EARTHED.

IMPORTANT:

The wires in this mains lead are coloured in accordance with the following code: Green-and-yellow : Earth

Blue

: Neutral

Brown

: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

ξThe wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.

ξThe wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

ξThe wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

iii

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PG-D4010X SetupModel No Serial No If YOU have ANY DOUBT, Consult a Qualified Electrician This Apparatus Must be EarthedPage Void the users authority to operate this equipment IntroductionENGLISHOnly A. onlyMaintenance Troubleshooting Index Using the Menu ScreenFor Future Reference Contents Reference Setting up the Projector Network Environment Network MenuPower-Cord Protection CleaningPower Sources AccessoriesOverloading Damage Requiring ServiceReplacement Parts Safety CheckAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Closed Caption uses Bitstream Vera fonts Using the projector in other countriesTemperature monitor function Other connected equipmentFor Macintosh When you want to view the Setup ManualSetup Manual For WindowsOptional accessories AccessoriesFront View Part Names and FunctionsProjector Top ViewTerminals Using the Carrying HandleUsing the Kensington Lock Rear ViewCLICK/RETURN COMPUTER, DVIUP/PAGE CLICK/EFFECTRemote control signal transmitters Inserting the BatteriesUsable Range Quick Start Setup and ProjectionAdjust the projected image Ceiling-mount Setup Setting up the ProjectorSetting up the Projector Standard Setup Front ProjectionProjection Distance Projection PRJ ModeExample 43 Signal Input Normal Mode Picture Size 120Signal Input Normal Mode Signal Input Stretch ModeScreen Size and Projection Distance You may need other cables or connectors not listed below Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer Supplied Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable AC socket Power cordTurning the Projector On Turning the Projector On/OffImage Projection Adjusting the Projected Image Adjusting the FocusAdjusting the Height Adjusting the Picture SizePress Keystone Press Keystone to enter the Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Correcting Trapezoidal DistortionOn-screen display Switching the Input ModeAdjusting the Volume VIDEO, Video buttons AV Mute button VOL +/- Volume buttonsResize Mode Press ResizeResize About Copyrights Switching the Eco+Quiet Mode Operating with the Remote ControlDisplaying and Setting the Break Timer Using the Spot FunctionDisplaying an Enlarged Portion of an Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Freezing a Moving ImageWhen right-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When left-clickingPicture menu Menu ItemsProjector adjustment PRJ-ADJ menu Screen adjustment SCR-ADJ menuHelp menu n Network menuHelp menu Items you can set with the Help menuPress MENU/HELP Using the Menu ScreenMenu Selections Adjustments Press Q or O and select Picture to adjustPress Enter To adjust the projected image while watching itPress P or R and select Bright to adjust Press O or Q to adjust the item selectedMenu operation n Picture Adjustment Picture MenuSelecting the Picture Mode PAGE1Adjusting Hue, Saturation, or Value Adjusting the ImageAdjusting the Color Temperature Adjusting the ColorsProgressive Reducing Image Noise DNREco+Quiet Setting the Overscan Adjusting the Projected Image SCR ADJ MenuSetting the Resize Mode 2Adjusting the Image PositionReversing/Inverting Projected Images Setting the On-screen DisplayClosed Caption Selecting the Background ImageAuto Restart Function Auto Sync Auto Sync AdjustmentAuto Power Off Function Standby ModeSelecting the Transmission Speed RS-232C Audio Output Type SettingSpeaker Setting Fan Mode SettingInput screen for keycode When the System Lock is setChecking the Lamp Life Status Enter the same keycode in Re ConfirmKeylock Function Locking the Operation ButtonsTaking the Keylock off On the projector, press Setting a PasswordSelect Password, then press Enter or Q Enter the same password in Reconfirm, then press EnterEnter IP Address using P, R, Q and O, then press Enter Setting up the Projector Network Environment Network MenuDhcp Client Setting TCP/IP SettingUtilizing the Help Menu Functions Troubleshooting with the Help MenuExample When image flickering appears Enter button Adjustment buttons P/R/O/Q MENU/HELP buttonCleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lensMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC A only Regarding the LampLamp Replacing the LampAN-D400LP Removing and Installing the Lamp UnitRemove the lamp unit cover Lamp unitResetting the Lamp Timer Computer Computer Compatibility Chart21-25 Troubleshooting52, 53 Sharp Electronics Corporation Specifications Dimensions Index Kensington Security Standard connector ·················13
Related manuals
Manual 34 pages 37.76 Kb Manual 1 pages 42.92 Kb

PG-D4010X specifications

The Sharp PG-D4010X is a highly versatile and advanced projector designed to cater to the needs of educational institutions, corporate environments, and professional presentations. This projector is well-regarded for its impressive performance, providing a rich visual experience and a plethora of features that enhance its usability in various settings.

One of the standout features of the PG-D4010X is its brightness. With a remarkable output of up to 4,000 ANSI lumens, this projector ensures clear and vibrant images even in well-lit environments. This level of brightness is particularly beneficial in classrooms and conference rooms where ambient light can be challenging. Additionally, the resolution of 1024 x 768 (XGA) guarantees sharp and detailed presentations, making it ideal for displaying graphs, charts, and videos.

In terms of technology, the PG-D4010X utilizes a 3LCD projection system, which offers a broad color spectrum and reduces the risk of color distortion. This results in bright, colorful images that are true to life. The advanced color processing capabilities of the projector ensure that both text and images are displayed with excellent clarity, making it suitable for a wide range of content from educational materials to business presentations.

The projector also incorporates a variety of connectivity options, ensuring compatibility with a range of devices. The PG-D4010X features HDMI, VGA, and USB ports, allowing users to connect laptops, tablets, and other media devices seamlessly. The inclusion of a built-in speaker amplifies the audio experience, providing an all-in-one solution for presentations without the need for additional audio equipment.

Another notable characteristic of this projector is its lamp life. The long-lasting lamp provides approximately 5,000 hours of operation in standard mode, which reduces the frequency of bulb replacements and lowers long-term maintenance costs. Furthermore, the projector has a convenient eco-mode that extends lamp life even further while conserving energy, making it environmentally friendly.

Overall, the Sharp PG-D4010X is a reliable and feature-rich projector that excels in performance and versatility. Its high brightness, excellent color reproduction, multiple connectivity options, and extended lamp life make it an ideal choice for educators, business professionals, and anyone seeking a dependable projection solution. Whether used for lectures, meetings, or multimedia presentations, the PG-D4010X delivers impressive results that meet the demands of today's dynamic environments.
Top Page Image Contents