Sharp PG-D4010X Audio Output Type Setting, Speaker Setting, Fan Mode Setting, Audio Input

Page 50

Adjusting the Projector Function (“PRJ - ADJ” Menu) (Continued)

Menu operation n Page 38

6 Audio Output Type Setting

This function determines whether the audio level output from the AUDIO output (MONITOR output) terminal is fixed or variable by linking with VOLUME.

Selectable

Description

items

 

 

 

FAO

Audio output that does not vary in

(Fixed Audio

strength with the volume level of the

Output)

source projector.

 

 

VAO

Audio output that varies in strength

(Variable

with the volume level of the source

Audio

projector.

Output)

 

Info

•When “Audio Out” has been set to “VAO”, fi rst make sure to lower the volume of the projector before turning the power on or off and when switching the input.

7 Speaker Setting

Selectable

Description

items

 

 

 

On

The audio signal is output from the

 

internal speaker.

Off

The audio signal is not output from the

 

internal speaker.

9 Selecting the Transmission

Speed (RS-232C)

Make sure that both the projector and computer are set for the same baud rate.

Selectable

Description

items

 

 

 

 

 

9600bps

Transmission speed is slow.

38400bps

 

 

 

 

115200bps

Transmission speed is rapid.

 

0 Fan Mode Setting

This function changes the fan rotation speed.

Selectable

Description

items

 

 

 

Normal

Suitable for normal environments.

High

Select this when using the projector at

 

altitudes of approximately 1,500 meters

 

(4,900 feet) or more.

When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.

System Lock Function

This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only authorized users have access.

8 Audio Input

This function allows you to select an appropriate combination of audio input terminals for each input mode.

Selectable

Description

items

 

Audio 1

The AUDIO 1 input terminal is used as

 

an audio input terminal.

Audio 2

The AUDIO 2 input terminal is used as

 

an audio input terminal.

Info

•If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 61). Even if the product warranty is valid, the keycode reset will incur a charge.

a Setting/Changing the keycode

1 Select “System Lock”, then press

ENTER or Q.

2 Select “Next”, then press ENTER.

•The screen for entering the keycode appears.

46

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Setup PG-D4010XModel No Serial No This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianPage IntroductionENGLISH Void the users authority to operate this equipmentA. only OnlyFor Future Reference Maintenance Troubleshooting IndexUsing the Menu Screen Contents Setting up the Projector Network Environment Network Menu ReferenceAccessories CleaningPower Sources Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function Closed Caption uses Bitstream Vera fontsFor Windows When you want to view the Setup ManualSetup Manual For MacintoshAccessories Optional accessoriesTop View Part Names and FunctionsProjector Front ViewRear View Using the Carrying HandleUsing the Kensington Lock TerminalsCLICK/EFFECT COMPUTER, DVIUP/PAGE CLICK/RETURNUsable Range Remote control signal transmittersInserting the Batteries Setup and Projection Quick StartAdjust the projected image Standard Setup Front Projection Setting up the ProjectorSetting up the Projector Ceiling-mount Setup120 Projection PRJ ModeExample 43 Signal Input Normal Mode Picture Size Projection DistanceScreen Size and Projection Distance Signal Input Normal ModeSignal Input Stretch Mode Connecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer AC socket Power cord Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable SuppliedTurning the Projector On/Off Turning the Projector OnAdjusting the Picture Size Adjusting the Projected Image Adjusting the FocusAdjusting the Height Image ProjectionCorrecting Trapezoidal Distortion Press Keystone to enter the Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Press KeystoneVIDEO, Video buttons AV Mute button VOL +/- Volume buttons Switching the Input ModeAdjusting the Volume On-screen displayResize Resize ModePress Resize About Copyrights Using the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying an Enlarged Portion of an ImageWhen left-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When right-clickingMenu Items Picture menuScreen adjustment SCR-ADJ menu Projector adjustment PRJ-ADJ menuItems you can set with the Help menu Network menuHelp menu Help menu nPress Q or O and select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Press MENU/HELPPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press EnterPAGE1 Picture Adjustment Picture MenuSelecting the Picture Mode Menu operation nAdjusting the Colors Adjusting the ImageAdjusting the Color Temperature Adjusting Hue, Saturation, or ValueEco+Quiet ProgressiveReducing Image Noise DNR 2Adjusting the Image Position Adjusting the Projected Image SCR ADJ MenuSetting the Resize Mode Setting the OverscanSelecting the Background Image Setting the On-screen DisplayClosed Caption Reversing/Inverting Projected ImagesStandby Mode Auto Sync Auto Sync AdjustmentAuto Power Off Function Auto Restart FunctionFan Mode Setting Audio Output Type SettingSpeaker Setting Selecting the Transmission Speed RS-232CEnter the same keycode in Re Confirm When the System Lock is setChecking the Lamp Life Status Input screen for keycodeTaking the Keylock off Keylock FunctionLocking the Operation Buttons Enter the same password in Reconfirm, then press Enter Setting a PasswordSelect Password, then press Enter or Q On the projector, pressTCP/IP Setting Setting up the Projector Network Environment Network MenuDhcp Client Setting Enter IP Address using P, R, Q and O, then press EnterEnter button Adjustment buttons P/R/O/Q MENU/HELP button Troubleshooting with the Help MenuExample When image flickering appears Utilizing the Help Menu FunctionsCleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsAbout the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Red on Abnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp A onlyLamp unit Removing and Installing the Lamp UnitRemove the lamp unit cover AN-D400LPResetting the Lamp Timer Computer Compatibility Chart ComputerTroubleshooting 21-2552, 53 Sharp Electronics Corporation Specifications Dimensions Kensington Security Standard connector ·················13 Index
Related manuals
Manual 34 pages 37.76 Kb Manual 1 pages 42.92 Kb

PG-D4010X specifications

The Sharp PG-D4010X is a highly versatile and advanced projector designed to cater to the needs of educational institutions, corporate environments, and professional presentations. This projector is well-regarded for its impressive performance, providing a rich visual experience and a plethora of features that enhance its usability in various settings.

One of the standout features of the PG-D4010X is its brightness. With a remarkable output of up to 4,000 ANSI lumens, this projector ensures clear and vibrant images even in well-lit environments. This level of brightness is particularly beneficial in classrooms and conference rooms where ambient light can be challenging. Additionally, the resolution of 1024 x 768 (XGA) guarantees sharp and detailed presentations, making it ideal for displaying graphs, charts, and videos.

In terms of technology, the PG-D4010X utilizes a 3LCD projection system, which offers a broad color spectrum and reduces the risk of color distortion. This results in bright, colorful images that are true to life. The advanced color processing capabilities of the projector ensure that both text and images are displayed with excellent clarity, making it suitable for a wide range of content from educational materials to business presentations.

The projector also incorporates a variety of connectivity options, ensuring compatibility with a range of devices. The PG-D4010X features HDMI, VGA, and USB ports, allowing users to connect laptops, tablets, and other media devices seamlessly. The inclusion of a built-in speaker amplifies the audio experience, providing an all-in-one solution for presentations without the need for additional audio equipment.

Another notable characteristic of this projector is its lamp life. The long-lasting lamp provides approximately 5,000 hours of operation in standard mode, which reduces the frequency of bulb replacements and lowers long-term maintenance costs. Furthermore, the projector has a convenient eco-mode that extends lamp life even further while conserving energy, making it environmentally friendly.

Overall, the Sharp PG-D4010X is a reliable and feature-rich projector that excels in performance and versatility. Its high brightness, excellent color reproduction, multiple connectivity options, and extended lamp life make it an ideal choice for educators, business professionals, and anyone seeking a dependable projection solution. Whether used for lectures, meetings, or multimedia presentations, the PG-D4010X delivers impressive results that meet the demands of today's dynamic environments.
Top Page Image Contents