Sim2 Multimedia HT5000 installation manual LED System Table, Connections

HT5000

LED SYSTEM TABLE

Status	Led blue	Led red
Initialisation
Standby
On
Cooling
Error (*)
: O￿	: On	: Flashing

(*): in case of error, contact your Local and authorized SIM2 Dealer for Service Information.

Fig. 11

6 CONNECTIONS

To obtain the best performance from your projector, we recom- mend the use of good quality “video cables”.

Poor quality cables will cause inferior picture performance.

For optimum connectivity we recommend you follow these simple steps:

With exception of coaxial RCA/Phono type connectors, always double-check that the plug is inserted the correct way round to avoid damaging the plugs or the sockets on the projector.

Remove cables by the plug and do not pull on the cable itself. Avoid tangled cables.

Position the cables carefully to avoid a trip hazard espe- cially in low light areas.

12