HT5000
2
1
3
5 4
6
5
1Projection lens.
2Magnetic cover for lens sostitution.
3Remote control IR sensor on front of unit.
4Unblock lens hole.
5Adjustable feet.
7
9
8
6Cooling air inlet/outlet vents.
7Bulb compartement.
8Connnection panel.
9Cooling air inlet/outlet vents.
•Read this manual carefully and keep it in a safe place for future consultation.
This manual contains important information on how to install and use this equipment correctly. Before using the equipment, read the safety prescriptions and instructions carefully. Keep the manual for future consultation.
•Do not touch internal parts of the units
Inside the cabinet there are electrical parts carrying dangerously high voltages and parts operating at high temperature. Never open the cabinet. Entrust all servicing and repair work to an authorised Service Centre. Opening the cabinet voids the warranty.
•Disconnecting the appliance from the power supply. The device which disconnects the unit from the mains is the power plug. Ensure that the power cable plugs and the electrical mains socket outlets are easily accessible during installation operations. Pull the plug, not the cable, to disconnect the unit from the mains.
•Use only the specified power supply.
Connect the units to a mains electrical supply with rated voltage of between
•Changing the fuses.
Before changing the fuse disconnect the unit from the mains power supply.
The fuse compartment is next to the power supply con- nector. Remove the fuse holder with a flat head screwdriver and replace the fuse. Fit a new spare fuse. Use only T 5A H fuses.
•Be careful with cables.
Make certain cables are routed so that people will not be impeded or tripped up.
Keep all cables away from children.