Sim2 Multimedia HT5000 installation manual Introduction

Page 3

HT5000

1 INTRODUCTION

The HT5000 projector represents the state of the art in image processing combined with the innovative DLP™ sytsem and outstanding optics.

Its range of inputs (1 Composite Video input, 1 S-Video input, 2 Components or RGB input - 4 RCA - 5 BNC, 2 Graphic RGB input, 6 HDMI™ inputs, 1 HD-SDI input, 1 DVI-D input) allow it to be connected to a wide range of analogue and digital sources: DVD players, video recorders, satellite and terrestrial receivers, computers, video game consoles, camcorders, etc.

Its image processing system allows optimum reproduction of a wide range of input signals, from interlaced video to high definition and digital graphics.

Faithful reproduction of signals at higher resolutions (such as high definition video and graphics) occurs without loss of information or reduction of image sharpness thanks to the processor’s high pixel rate signal acquisition capabilities.

Different input signal resolutions can be adapted to match the specified screen resolution without loss of image quality, thanks to a generous selection of preset aspect ratios, some of which are user definable.

All picture adjustments can be made with the remote control interac- ting with a simple menu-activated On Screen Display; alternatively, the projector can be controlled by a domestic automation system via its serial port, by a USB 1.1 connection or by ethernet RJ45 connection.

The appliance has been subjected to exhaustive operating tests by SIM2 to ensure maximum quality.

The projector bulb life should thus initially be around 30-60 hours. Besides the usual checks, the Quality Control department also runs additional statistical tests before despatch.

In this instance the packaging may show signs of having been opened, and the hours operation of the lamp may be higher than the value required under standard procedures.

 

CONTENTS

 

 

 

 

 

 

 

 

 

 

 

 

1

INTRODUCTION



9

CLEANING AND MAINTENANCE

6

 

 

10

COMMON PROBLEMS

6

 

 

2

IMPORTANT SAFETY INSTRUCTIONS

4

 

 

11

OPTIONAL ACCESSORIES

7

 

 

3

UNPACKING

8

 

 

 

Technical specifications

8

 

 

4

INSTALLATION

9

 

 

 

 

Structure of the on screen menu

9

 

 

5

SWITCHING THE PROJECTOR ON AND OFF

11

 

 

 

 

Dimensions

1

 

 

6

CONNECTIONS

12

 

 

 

 

Projection distance



 

 

7

REMOTE CONTROL

15

 

 

 

 

Vertical - Horizontal Shift

4

 

 

8

ON SCREEN MENU

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FULL HD

DLP and DMD are registered trademarks of Texas Instruments.

HDMI, the HDMI logo and the expression High-Definition Multimedia Interface

1920x1080

are trade marks or registered marks of HDMI licensing LLC

 



Image 3
Contents HT5000 HT5000 Remote Control and KeypadIntroduction Important Safety Instructions Lamp WarningEnvironmental Information Class B Product FCC StatementHT5000 Product Disposal Unpacking Contents of PackageInstallation Keystone 20% Switching the Projector on and OFF Connections LED System TableConnection panel Composite Video VideoDVI-D Remote Control On Screen Menu InputsMain Menu Color PictureImage Noise ReductionStandard Overscan Select the coefficient which determines the curveInitial Settings SetupLamp Power Power onInputs List Menus LanguageOSD Timeout Source InformationMemories Memories Info Quick MenusMessages Troubleshooting Guide Cleaning and MaintenanceOptional Accessories General Projector Specifications Technical Specifications ElectronicsOn Screen Menu Layout ImageMenu SetupDimension Valid Measurement only with Standard Lens Projection Distance MetersVertical Horizontal Shift Horizontal Shift