Sim2 Multimedia RTX55H Factory Defaults, Menu Language, Source List, Insert text, Source list

FACTORY DEFAULTS

Reconfigures the Display to original factory settings except Position, Orientation, Y/C Delay, Zoom and Focus.

Confirm?

No Yes

MENU

LANGUAGE

Lists the languages available for the On Screen Display menus.

SOURCE LIST

In order for the RTX55H system to be more flexible, the following described functions allow to modify the input selection menu making it more user friendly.

The main window shows all the inputs available on the DigiOptic™ Image Processor.

If one or more inputs are not utilized, it is often helpful to blank them from the input list (accessed with the 0 key).

Once the input has been chosen, in the drop menu that appears by pressing the ￿ key, it is possible to activate the source (Fig. 15).

The exclusion or activation of the source will automatically renumber the remaining active inputs.

Source list

1	VIDEO	1		VIDEO 1
2	VIDEO	2		VIDEO 2
3	S-VIDEO		3	S-VIDEO 3
				ACTIVE	Yes	No
4	S-VIDEO		4	S-VIDEO 4
5	COMPONENT / RGBS 5			NAME
				COMP RGB 5
6	COMPONENT / RGBS 6			COMP RGB 6
7	COMPONENT / RGBS 7			COMP RGB 7
8	COMPONENT / RGBS 8			COMP RGB 8
9	GRAPHICS RGB 9			GRAPH RGB 9
10 GRAPHICS RGB 10				GRAPH RGB 10
11 DVI-D 11				DVI-D 11
12 HDMI 12				HDMI 12

Fig.15

The inputs with an active video signal (visible in the input selection menu) are marked with a check symbol.

It can be also helpful to identify the input with a name chosen by the user (for example with the name of the connected source)

rather than with the signal type.

Once chosen to have the input visible, in the drop menu, by selecting the Name option it is possible to rename the source in use.

This will make it easier to remember the source connected to a specific input. You can use up to 12 alphanumeric letters to name the source (for more details check the “Insert text” section)

Insert text

You will be able to insert text easily and rapidly by accessing the text insertion menu (fig. 16)

Edit source name		()?@	ABC	DEF
		1	2	3
_ _ _ _ _ _ _ _ _ _ _		GHI	JKL	MNO
		4	5	6
		PQRS	TUV	WXYZ
Cancel	-	7	8	9
Confirm	+		0

Fig.16

The text insertion mode remains the same if text is being inserted for the first time or if a previously inserted name is being edited. The letter insertion can be done in any available position (represented by horizontal lines).

Use the ￿ and ￿ keys to move between letters either left or right respectively.

Press the numeric key matching the letter (Fig.16), the first click of the key selects the first letter, the second click the second letter and so on.

The available letters are shown in the text insertion menu. Once one letter has been inserted, to insert the following one it is necessary to move with the cursor in the next right position with the ￿ key of the remote control, repeat this procedure to insert other letters.

Use the ￿ key to switch from small case to capital letters and vic versa.

Any mistake can be deleted with the ￿ key once it has been positioned on the wrong letter.

Once the text insertion process is finished, it can be confirmed and saved by clicking the MENU+ key.

If you want to delete the modifications use the MENU- key of the remote control.

17