Sim2 Multimedia RTX55H Horizontal frequency, Vertical frequency 48 -100 Hz Video standards

Page 26

Horizontal frequency:

from 15 to 80 kHz (up to UXGA, 60 Hz)

Vertical frequency:

48 -100 Hz

Video standards:

automatically selected (PAL B, G, H, I, M,

 

N, 60, SECAM, NTSC 3.58 and 4.43)

High definition video:

ATSC HDTV (480p, 720p, 1080i, 1080p)

Graphic standards:

VGA, SVGA, XGA, SXGA, UXGA

Deinterlacer:

Faroudja chipset, DCDi™, 3:2 pull down

 

sequence conversion

Colour temperature:

from 5000 to 9300 °K (three presets and

 

one user settable)

Control:

infrared remote control, RS232 serial (DB9

 

connector, female)

GENERAL

 

Power supply cable:

(EU, UK and US); length 2 m

Power supply:

100 to 240 VAC, tolerance ± 10%,

 

frequency from 48 to 62 Hz

Consumption:

30W max

Dimensions:

483 x 55 x 200 mm (WxHxD); compatible

 

with 19" rack

Weight (approx.):

2.5 kg

Operating Temperature:

10 to 35 °C

Transportation temperature: -15 to 55 °C

Storage temperature:

-15 to 55 °C

Humidity:

20% to 95% non-condensing

Safety:

EN 60950, UL 60950

Transportability:

desktop equipment

Electromagnetic

 

compatibility:

EN 55022 Class B

 

EN 55024

 

EN 61000-3-2

 

EN 61000-3-3

Transport:

IEC 68-2-31, IEC 68-2-32

LINK CABLE

Composition:

three 50/125 m multimode optical fibre

 

cables

Connectors:

LC type

Length:

20.0±0.2m

Diameter:

5 mm max

Tensile strength:

1200N*

Type Approval:

UL OFNP

*traction applied on outer cable, not on fibre cores or connectors.

24

Image 26
Contents Look Forward Cod.46.0360.200Arrow Up/Down activate Quick menus KeysUp/Down/Left/Right Arrow keys Introduction Page Important Safety Instructions Class 1 Laser ProductBeware of power supply cables Power supply disconnect deviceUse only the specified type of mains power supply Do not touch internal parts of the unitsInstallation Connecting the TWO UnitsFerrule Video 1 Connecting the Video SourcesEnsure that Video 3Hdmi RGB Graphics 9DVI-D Control RS232Page Switching on from STAND-BY Switching on and OFFSignificant status signals are given in Table DigiOptic ImageKeypad ESC AutoInputs Remote ControlOn Screen Menu InputsImage Main MenuPicture Brightness Sharpness ModeCinema Mode ContrastAspect Color TemperatureInputs Adjustments Gamma CorrectionPower on FREQUENCY/PHASEDelay OverscanSource List Factory DefaultsMenu Language Insert textBlank OSD TimeoutF1/F2 Keys Source InformationMemories Image PictureQuick Menu No signalInfo Messages No power LEDs always OFF Maintenance Troubleshooting Guide Lamp fails to switch onPicture is disturbed, unstable or noisy Remote control not workingNo picture Image incomplete along borders vertical or horizontalOptical Electrical Technical SpecificationsAdditional Information GeneralHorizontal frequency Colour temperatureConnector, female Vertical frequency 48 -100 Hz Video standardsDimensions Picture On Screen Menu LayoutSetup Keypad Remote Control On Screen Menu Introduction Important Safety Instructions InstallationSwitching on and OFF Maintenance Troubleshooting Guide Additional InformationSIM2 Multimedia is certified