Motorola PTP 300, PTP 500 installation instructions Cable and Gland Installation Notes

Page 12

Cable and Gland Installation Notes

Step 1: Make a cable as specified on Page 10 or 11.

Plug in the RJ 45 into the ODU.

Step 3: Once the gland is fully hand screwed into the ODU it may be tight- ened to a torque of to 7 ftlbs/10Nm, with a 22mm wrench.

Gland on the right-hand side has been over tightened. As a result, the internal seal and structure have been damaged.

Step 2: Support the drop cable and gently hand screw the gland body into the ODU until the O ring seal is flush to the ODU body.

Caution Do not fit the back shell prior to securing the gland body.

Step 4:When the gland body has been fitted, tighten the gland back shell.

Attention Do not over tighten the gland back shell

Should it be necessary to disconnect the cable at the ODU (or PTP LPU), this can be achieved by removing the gland back shell first. Then, wiggle the cable to release the tension of the gland body as shown in the figure below. Then you can unscrew the gland body and depress the RJ45 locking tab with a small screwdriver.

 

Apply small movements to the cable until

12

you see a gap here before unscrewing the

gland body.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PTP 300/500 Series Protect Your Installation Recommended components for protecting an installation areProtection Requirements Checklist, Site Survey and Tools ChecklistBench Testing Optional Connect and Power Up Bench Testing Optional Configuration Checks Hoist & Safety Loop Mast Installation Instructions Work NB On no acCount must this be at Tached to the mount Ing bracket boltsMotorola PTP 300/500 Series Installation Wiring Correct cable preparation for the recommended cable 36mm min 45mm max Cable and Gland Installation Notes Pre-Power Testing Between pinsCat5E Resistance Meters 3&6, 4&5Pre-Power Testing Recording Resistance Values User NotesMeasure Measured ValuePost-Power Testing and Fault Finding Pidu green power LED flashesCorrect operation is as follows Pidu Ethernet orange LED flashes ten times but irregularlyInstallation and Commissioning Tone Description State DescriptionAudio indications from the ODU Additional Notes Installation and Commissioning Registration Warranty and Ordering Information License Keys and Regulatory Information

PTP 500, PTP 300 specifications

Motorola's PTP 300 and PTP 500 series are engineered to provide robust point-to-point microwave solutions tailored for various applications, including backhaul for broadband networks, enterprise connectivity, and more. These systems are designed to deliver reliable, high-capacity wireless connectivity, making them integral components of modern communication infrastructures.

The PTP 300 series operates in the 2.5 GHz frequency band, allowing for long-range communication capabilities of up to 100 miles, depending on environmental conditions and deployment scenarios. This series supports data rates of up to 56 Mbps, making it suitable for applications that demand high-speed data transmission. It utilizes advanced MIMO technology, which enhances throughput and wireless reliability by utilizing multiple antennas to transmit and receive data simultaneously.

The PTP 500 series, on the other hand, operates in both the 5 GHz and the 4.9 GHz frequency bands. This versatility allows operators to select the optimal frequency for their specific environment, helping to mitigate interference and optimize performance. The PTP 500 series can achieve even higher data rates, reaching up to 300 Mbps, and can cover distances exceeding 30 miles.

Both series feature robust security mechanisms, including AES encryption, to safeguard data integrity and confidentiality. Their inherent design incorporates efficient power consumption and minimal latency, making them suitable for real-time applications like VoIP and video conferencing.

Installation and maintenance of the PTP 300 and PTP 500 systems are user-friendly, owing to a web-based management interface, which simplifies configuration and troubleshooting. They also include auto-alignment features that facilitate quick deployment and ensure optimal signal strength.

In terms of physical characteristics, both the PTP 300 and PTP 500 models are built to withstand harsh environmental conditions, sporting durable enclosures that adhere to IP-rated standards. This resilience makes them apt for outdoor installations.

Overall, the Motorola PTP 300 and PTP 500 series deliver dependable, high-throughput microwave technology, with features that cater to various communication needs while ensuring scalability, security, and ease of use. As networks evolve to accommodate higher bandwidth demands, these systems represent a strong choice for enterprises and service providers alike.
Top Page Image Contents